Troubleshooting - Hotpoint SH89PX S Operating Instructions Manual

Hotpoint ovens operating instructions

Hide thumbs Also See for SH89PX S:

Operating instructions manual (16 pages)

Operating instructions manual (16 pages)

Table of Contents

Programming the automatic cleaning end time

1. Press the

button until the

digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards " " and " " to adjust the

hour value.

3. Press the

button again until the other two digits on

the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards " " and " " to adjust the

minute value.

5. Press the

button again to confirm.

6. When the set time has elapsed, the text END appears on

the display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

FAST CLEAN level has been selected, with the default

duration of 1 hour. 12:30 is scheduled as the end time.

The programme will start automatically at 11:30 a.m.

Programming has been set when the

buttons are illuminated. The display shows the FAST CLEAN

end time and duration alternately.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the oven

has cooled down sufficiently before you can open the oven

door. You will notice some white dust deposits on the bottom

and the sides of your oven; remove these deposits with a

damp sponge once the oven has cooled down completely.

Alternatively, you can make use of the already heated oven,

in which case it is not necessary to remove the deposits,

they are completely harmless and will not affect your food

in any way.