Starting And Stopping - Husqvarna 436 Li Operator's Manual

Starting and stopping

WARNING! Note the following before
!
starting:
Never start a chain saw unless the bar,
chain and all covers are fitted correctly.
Otherwise the drive sprocket can come
loose and cause personal injuries.
Make sure you have a secure footing and
that the chain cannot touch anything.
Keep people and animals well away from
the working area.
• Before inserting the battery into the machine, always
check to see that the power trigger actuates properly
and returnes to the "OFF" position when released. To
prevent the power trigger from being accidentally
pulled, a power trigger lockout is provided.
• Never start a chain saw unless the bar, chain and all
covers are fitted correctly. See instructions under the
heading Assembly.
• Observe your surroundings and make sure that there
is no risk of people or animals coming into contact with
the cutting equipment.
• Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
STARTING AND STOPPING
should use this grip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
Starting
• Insert the battery in the machine. The battery should
slide easily into the battery holder on the machine. If
the battery does not slide in easily, it is not being
inserted correctly.
• Press on the lower part of the battery. You will hear a
click as the battery locks itself into place.
• Press and hold the start button (>1 sec.) until the
green LED is lit.
–
English 25