Brother 2040 User Manual page 15

3
While pressing the blue paper-guide release lever, slide
the paper guides to fit the paper size. Check that the
guides are firmly in the slots.
4
Put paper in the tray.
5
Check that the paper is below the maximum paper mark
(▼).
Note
• Paper jams may occur if you put more than 250 sheets
2
(80 g/m or 21 lb) of plain or bond paper in the paper
tray at any one time.
• Paper jams may occur if you put more than 10
transparencies in the paper tray at any one time.
• When you use pre-printed paper, put the side that is
going to be printed on (blank side) face down, with the
top of the paper at the front of the tray.
6
Put the paper tray firmly back in the printer. Check that it is completely in the printer.
About this printer
1
1 - 8