9.1.6.
SD_USB P.C.B.
1. Remove the connector (A).
2. Remove the 2 Screws (B).
9.1.7.
BD Drive
1. Remove the OPU FFC, and isolate it with an ESD pre-
vention bag (RPFC0114) to prevent the laser diode from
the ESD damage.
2. Remove the 3 FFCs.
3. Remove the 2 Screws (A ), remove 2 tabs (B) of BD Drive
in the direction of the arrow, to remove BD Drive.
9.1.8.
Rear Panel
1. Remove the 2 Screws (A) and Screw (B).
2. Unlock 2 locking Tabs (C) to remove the Rear Panel.
9.1.9.
Power P.C.B.
1. Remove the connector (A).
2. Remove the 2 Screws (B).
9.1.10. Digital P.C.B.
1. Remove the 2 Screws (A) to remove Digital P.C.B..
33