Advertisement
1
/
2
(MAGNESIUM, 2 HAMMER)
ASSEMBLY AND OPERATING
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
Copyright
2004 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
" IMPACT WRENCH
Model 91715
INSTRUCTIONS
TO PREVENT SERIOUS INJURY,
®
. All rights reserved. No portion of this manual or any
®
REV 09/04
Advertisement
Table of Contents
Related Manuals for U.S. General 91715
Summary of Contents for U.S. General 91715
- Page 1 AND INSTRUCTIONS BEFORE USE. © ® Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
-
Page 2: Specifications
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. REV 05/05 SKU 91715 For technical questions, please call 1-800-444-3353 Page 2... - Page 3 21. This Impact Wrench should only be used with impact sockets and extensions. Using any other accessories can cause the accessories to break, causing permanent damage to the unit and severe injury to the operator. SKU 91715 For technical questions, please call 1-800-444-3353 Page 3...
- Page 4 Unpacking When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
- Page 5 Use other appropriate methods and tools to loosen the nut. When the nut is loosened, release the Trigger (409). Turn off the air compressor and disconnect the hose. If needed, remove the nut from the socket. SKU 91715 For technical questions, please call 1-800-444-3353 Page 5...
- Page 6 Turn it so that it points straight up and down for low speed forward (shown above). Turn it all the way counterclockwise for reverse. REV 03/05 SKU 91715 For technical questions, please call 1-800-444-3353 Page 6...
-
Page 7: Parts List
ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 03/05 SKU 91715 For technical questions, please call 1-800-444-3353 Page 7... - Page 8 Assembly Drawing REV 03/05 SKU 91715 For technical questions, please call 1-800-444-3353 Page 8...
Need help?
Do you have a question about the 91715 and is the answer not in the manual?
Questions and answers