Wireless Configuration - ViewSonic WPCI-100 User Manual

8. Complete the Wireless Configuration procedure for your operating
system:
• If you are using Window XP, complete the instructions in the next
section, Wireless Configuration.
• If you are using Windows 98SE, ME, or 2000, see the Appendix for
configuration instructions.

Wireless Configuration

SUGGESTION: To configure your WPCI-100, you will need the
configuration settings (Network Name [SSID], security settings, etc.) of your
wireless router or gateway. For your convenience, write down these settings
for later reference.
To configure your WPCI-100 with Windows XP, do the following:
1. From the Windows XP desktop, right-click the Wireless Monitor utility
icon on the Windows status bar (shown below), then select Enable
Windows Zero Configuration (WZC).
The Wireless Network Connection screen displays.
ViewSonic Wireless PCI Adapter
Wireless Monitor utility icon
7