ViewSonic WPCI-100 User Manual page 10

2. In the Available wireless networks list, click the network name (SSID)
that you want to join.
• If you selected an SSID without a network key (WEP or WPA) associated
with it, click Allow me to connect to the selected wireless network,
even though it is not secure, then click Connect. See the Wireless
Network Connection screen shown on the previous page.
• If you selected an SSID with a network key, enter it in the Network key
field, re-enter it in the Confirm network key field, un-check Enable
IEEE 802.1x authentication for this network, then click Connect. See
the Wireless Network Connection screen shown on the next page.
• IMPORTANT: Be sure to un-check Enable IEEE 802.1x authentication
for this network.
ViewSonic Wireless PCI Adapter
An access point
(SSID) that does
not have a network
key (WEP or WPA)
8