TP-Link TD-W8968 User Manual page 73

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
I. By PBC
If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods. Click Push-Button, you will see the
screen as shown below.
Figure 4-72
Method One: Hardware push button.
Step 1: Press the WPS button on the back panel of the modem router.
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen of adapter appears. Click Finish to complete the
WPS configuration.
64