TP-Link TD-W8968 User Manual page 21

TD-W8968
Wireless Router Mode: In this mode, the device enables multi-users to share Internet via
Ethernet WAN (EWAN) using its interchangeable LAN/WAN port and share it wirelessly at
300Mbps wireless 802.11n speeds.
3G Router Mode: In this mode, the device allows multi-users to share a 3G mobile broadband
connection via wired or wireless connection.
Note:
If you are unwilling to configure WAN Service now, you can click the Skip WAN button. Then you
can configure WAN service referring to
Step 5. Configure parameters for WAN connection. For ADSL Modem Router Mode and
Wireless Router Mode, 3G Router Mode
If ADSL Modem Router Mode is chosen, please select your Country and ISP from the
drop-down list, and enter related parameters provided by your ISP. Then click Next. Here we
use PPPoE as an example.
Note:
If your country or ISP is not listed, please select Other. Then you can manually enter the VPI/VCI
values and select Encapsulation Mode provided by your ISP.
If Wireless Router Mode is chosen, please select WAN Link Type provided by your ISP and
enter the related parameters, then click Next. Here we use PPPoE as an example.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.4.1 Layer2
Figure 3-8
12
Interface.