Fujitsu CELSIUS H710 Operating Manual page 85

Table of Contents

Error message/cause

Operating system not found

Press <F1> to resume, <F2> to SETUP

This error message appears if an error occurs

during the self-test before starting the operating

system.

Previous boot incomplete - Default conﬁguration

used Due to an error during the previous system

boot, default values were used for certain

settings. Check the settings in the BIOS Setup.

Real time clock error

nnnnK Shadow RAM failed at offset: xxxx Failing

Bits: zzzz

System battery is dead - Replace and run SETUP

System cache error - Cache disabled

System timer error

Fujitsu Technology Solutions

Resolution

► Check in the BIOS Setup whether your hard

disk has been set correctly.

► Make sure that the operating system is

installed on the corresponding drive.

► Press the

function key to start the

operating system.

► Press the function key

BIOS Setup.

► Press the

function key when prompted

to do so.