Connecting An External Monitor - Fujitsu CELSIUS H710 Operating Manual

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to
the DisplayPort. Screen output is limited to a maximum of two monitors at any one time
(see "Key combinations", Page
Monitorport Monitorport VGAconnection socket Monitor
Digital DisplayPort
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
Fujitsu Technology Solutions
24, section "Toggle output screen").
P
Analogue VGA monitor port
"Key combinations", Page
Connecting external devices
24.
63