Table of Contents
Advertisement
18
Installation
10. Install the lower hinge in the opposite
side, using the screws previously re-
moved.
11. Carefully replace the appliance in its
working position and adjust the level of
the appliance by screwing / unscrewing
the adjustable feet at the bottom of the
cabinet using your fingers or a tool.
12. Slide the hole cover out of the ventila-
tion grille by pushing it in the direction
of the arrow and reassemble it on the
opposite side.
13. Install the ventilation grille, fixing the
screws.
14. Remove the plugs (1) on the upper side
of both doors and move them to the
other side.
15. Remove the handle. Unscrew the top
handle bracket from the handle rod (h1).
Unscrew the bottom handle bracket
from the door (h2)
Unscrew the top handle bracket from
the door (h3).
Install the plug (1).
16. Install the handle in the opposite side.
Re-screw the handle bracket on the door
(h4). Turn the handle bracket with the
handle and screw them to the door (h5)
and the fitted handle bracket (h6).
17. Install the lower door.
18. Install the middle hinge (H) on the op-
posite side.
19. Install the upper door.
20. In your documentation bag you will find the upper hinge necessary to make the re-
versibility. Put the hinge in position and screw it.
21. Make sure that the front board of the door is parallel to the front board of the top.
22. Reposition, level the appliance, wait for at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
1
h1
h2
h4
h5
h3
h6
Advertisement
Table of Contents
