Changing The Display Settings - Toshiba L50 User Manual

When you change the display output device, the playback device may not
switch automatically. In this case, in order to set the playback device to the
same device as the display output device, please adjust the playback
device manually by the following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want to
switch to.
3. To use the internal speakers on your computer, select Speakers. To use
the television or the external monitor that you have connected to the
computer, select a different playback device.
4. Click the Set Default button.
5. Click OK to close the Sound dialog.
Settings for display video on HDMI
To view video on the HDMI display device, be sure to configure the
following settings otherwise you may find that nothing is displayed.
Be sure to use the function key to select the display device before starting
to play video. Do not change the display device while playing video.
Do not change the display device under the following conditions.
Selecting HD Format
To select the display mode, follow the steps as detailed below:
1.
2.
3.
4.
5.
6.
7.

Changing the display settings

After one or more external displays are connected, the operating system
can automatically detect, identify and setup the display settings.
You can also manually manage how the external displays will work and
change the display settings by pressing P while holding down the
Windows (
the computer's power off, be sure to switch to the internal display.
User's Manual
While data is being read or written.
While communication is being carried out.
Click Start -> Control Panel.
Click Appearance and Personalization.
Click Display.
Click Change display settings.
Click Advanced settings.
Click List All Modes.
Select one of the mode at List All Modes.
) key. If you disconnect the external display before you turn
4-37