Using N1 As A Mass Storage - TizzBird N1 User Manual

23 Using N1 as a Mass Storage

TizzBird N1 contains T-flash memory which is mainly used for Android system image and
working area. Some part of T-flash area is assigned to SD-card area which is used by
Android system as an external memory. This SD-card area can be accessible by PC as a USB
mass storage device (UMS). So if you have 8G/ 16G/ 32GB version of TizzBird N1, you can
use more extra SD card area for storing various multimedia contents.
Here's the procedure to access. Before do that, please prepare normal micro-USB cable
to connect PC. The micro-USB cable is normal type that can connect SMART PHONE with PC
USB port.
1) Connect N1 to TV and turn it on.
2) Select <SETTING BROWSER>  <SYTSTEM>  Page2 <Advanced Setting>  OTG
Port Mode
3) Select "External Storage (UMS)" to connect PC.
4) Turn off the power of N1.
5) Connect PC with micro-USB cable you prepared.
6) The N1 will power-on and work as a MASS STORAGE DEVICE. You can freely access the
N1's storage area including reading, writing & erasing.
7) After done, please restore the <OTG Port Mode> to "Host" when connect the N1
back to TV. Otherwise, the SD card area will not be accessible by Android system of N1.
77