Table of Contents
Advertisement
DVD TEST MODE
1. How to Activate DVD Test Mode
Insert the AC plug, while pressing the DVD/CD function button.
All the indicators on the FL display tube will light up, and the test mode will be activated.
2. How to Cancel DVD Test Mode
Either one of the following operations will cancel the DVD test mode.
• Disconnect the AC plug.
•
Press any function button. (Except DVD/CD function button)
•
Press the POWER button.
3. DVD Test Mode Functions
•
Status indication and media indication
After the DVD test mode is activated, "S**M**" will display on the FL display tube.
S** indicates the status.
Status indication
S41
S42
S43
S44
S45
S46
S47
S48
S49
M** indicates the type of media.
Media indication
M21
M22
M23
M24
M25
When status (numeric) other than the above are displayed, all the data is invalid.
Display example:
The display shown below means the following.
S41 STOP
M25 DVD
•
Normal indication
The normal indication appears, as long as the DVD/CD button is being pressed during starting up of the DVD test mode.
Status that pickup stops at the inner circumference
Status that pickup stops at the inner circumterence with resume data
PLAY status
PAUSE status
SKIP status
TOC is being read
Signal of EEPROM writing end
Status in which status is not determined yet
Signal of DISC END
NO DISC
CD-DA
VCD (Ver1.0 or Ver1.1)
VCD (Ver2.0)
DVD
Contents
Contents
– 25 –
Advertisement
Table of Contents
