System Configuration Menu; Diagnostics Menu - HP Desktop Computer User Manual

System Configuration menu

Select
Language Support
Button Sound (select models only)
Virtualization Technology
Processor C4 State (select models only)
LAN Power Saving (select models only)
Card Reader/1394 Power Saving (select models
only)
Fan Always On
Boot Options

Diagnostics menu

Select
Hard Disk Self Test
Secondary Hard Disk Self Test (select models
only)
Memory Test
6 Chapter 3 Setup Utility menus
To do this
Change the Setup Utility language.
Enable/disable the capacitive button tapping sound.
Enable/disable the processor Virtualization Technology.
Enable/disable the processor C4 sleep state.
Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Enable/disable Card Reader/1394 Power Saving. When enabled, saves
power when the computer is in DC mode.
Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Set the following boot options:
●
f9 and f10 Delay (sec.)―Set the delay for the
of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●
CD-ROM boot―Enable/disable boot from CD-ROM.
● Floppy boot―Enable/disable boot from diskette.
●
Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●
Boot Order―Set the boot order for:
◦
USB Floppy
◦
Internal CD/DVD ROM Drive
◦
Hard drive
◦
USB Diskette on Key
◦
USB Hard drive
◦ Network adapter
To do this
Run a comprehensive self-test on the hard drive.
NOTE: On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Run a comprehensive self-test on a secondary hard drive.
Run a diagnostic test on the system memory.
f9 and f10 functions