Logitech TypeAway Setup page 3

For a Macintosh Installation
®
1. Turn on the computer, then perform a HotSync
handheld documentation.)
®
2. Insert the Logitech TypeAway
located on the desktop.
3. Open the "Macintosh" folder, then the "TypeAway Keyboard" folder. Double-click "TypeAway.prc" to install that program.
4. Follow the on-screen instructions to finish software installation.
5. Perform another HotSync
(Refer to the documentation that came with your Palm
6. Reset the Palm ™ handheld by tapping the Reset button on the screen.
7. After resetting the Palm
handheld, you must disable those drivers as well.
™
8. On the Palm handheld, tap the Logitech
™
9. Turn off the Palm handheld and connect it to the Logitech
"Setting Up the Keyboard."
® operation to back up the data on your handheld. (Refer to your Palm
™
software CD into the computer's CD ROM drive. Open the CD by double-clicking its icon
®
operation to transfer the keyboard software application to your handheld.
™ handheld, disable other keyboard drivers. If you use other serial port devices on your Palm
®
icon to launch the driver software.
English
™ handheld for more information about performing a HotSync
®
TypeAway™ keyboard, as described in the section
™
® operation.)
™
3