Table of Contents
Advertisement
SETTINGS
1
Press a/b to select "Settings", then press d or
ENTER.
2
Press a/b to select "Communication Setup",
then press d or ENTER.
3
Press d or ENTER to move to the menu to the
right.
4
Press a/b to select "Change", then press
ENTER.
Setting the info. of the Ethernet
[Current Setup]
IP Address
: Auto Setup
Netmask
: Auto Setup
Gateway
: Auto Setup
DNS
: Auto Setup
Change
Initialize
• For initializing the current setting, select "Initialize",
then press ENTER.
5
For setting the IP address, press c/d to select
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
No
IP Address
Netmask
Gateway
Next
• If selecting "Yes": The IP address is automatically
obtained.
• If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 46.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
6
Select "Next", then press ENTER.
• If selecting "Yes" in the step 5, go to the step 8.
7
Enter your DNS address.
Enter your DNS address.
Primary
Secondary
Next
• The primary and secondary DNS addresses are
entered using the screen for inputting characters.
(See page 46.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
8
Select "Next", then press ENTER.
9
For testing the connection to the Internet, after
confirming the settings, press a/b to select
"Test", then press ENTER.
• "Test" is available only when setting to obtain the IP
address automatically. "Test" cannot be selected if
the IP address has not been obtained automatically.
Confirm the current setting.
IP Address
: xxx xxx xxx xxx
Netmask
: xxx xxx xxx xxx
Gateway
: xxx xxx xxx xxx
DNS Address
: xxx xxx xxx xxx
xxx xxx xxx xxx
MAC Address
: xx xx xx xx xx xx
Test
Complete
• As a result of the test, if the Internet connection
fails, enter the setup values manually.
10
Press a/b to select "Complete", then press
ENTER.
11
Press HOME or EXIT to return to the HOME
screen.
• To perform other settings, press j.
45
Advertisement
Table of Contents
