Connection; Connecting To A Tv/Projector - Sharp BD-HP25A Operation Manual

Connection

Connecting to a TV/Projector

You can enjoy high quality digital picture and sound using an HDMI cable. (Only
TVs/projectors with an HDMI terminal can be connected to this player.)
When you use AQUOS LINK, make sure to use a certified HDMI cable.
1
Be sure to turn off this player and the TV/projector before making any
connections.
2
Firmly connect the HDMI cable (supplied) to the HDMI OUT terminal on the
player (1) and the HDMI IN terminal of the TV/projector (2).
Projector
16
HDMI cable
(supplied)
TV
NOTE
• In this player, "HDMI Video Out" is set to "Auto" as a default (See page 41). (Normally
set to "Auto".) If you don't get a stable image with "HDMI Video Out" set to "Auto",
select the output resolution which corresponds to the connected equipment.
• To enjoy 3D images, connection to a 3D compatible TV is needed.
• For connection to a TV/projector, refer to the TV/projector's operation manual.
E
After connecting
• If desired, connect audio equipment. (page 17)
• If necessary, perform the Audio Video Settings. (pages 41–42)
• Refer to AQUOS LINK function. (pages 22 and 42)
• Prepare the desired disc or content and start playback. (pages 24–33, 52)