Basic Operation; Usb Charging Port; Display Mode; Radio Mode - Teac Ghetto Blaster PBT1000 User Manual

BASIC OPERATION

USB Charging Port

This unit is equipped with a DC 5V USB charging port on the back panel.
To use it, simply connect the device you would like to charge (eg: smartphone or tablet) to a
compatible USB cord and plug it into the USB charging port. The device will be charged
automatically when it is successfully connected, even during music playback.
NOTE: USB cords (not provided) for charging will vary according to the device that is to be
charged. Please consult your device's documentation to see what type of cable you may need.
Charging efficiency may depend on the USB cable's type and quality.

Display Mode

The unit's display normally shows the Spectrum Analyzer and volume level indicator as
indicated below:
Mode Indicator
(shows the current input
source, e.g. AUX1, BT)
Volume level indicator
Other display modes:
This unit also has several different display modes. To change the display mode, press the
DISPLAY MODE key on the front panel.
The chart below shows you the function of the DISPLAY MODE key in different input sources:
Input Mode
Bluetooth®
Shows Bluetooth® searching/pairing/connected status
Press ONCE: Will show track and folder number information
Press TWICE: Will show ID3 information (MP3 song information such as
USB/ SD
AUX 1 / AUX 2
(Not applicable)

Radio Mode

- To enter Radio Mode, press the FUNCTION key repeatedly until the display shows "FM".
- To improve radio reception, adjust the position of the unit. To further enhance reception, take
the supplied external FM antenna and plug it into the FM antenna socket on the rear panel.
- After tuning into a desired station, use the FM MODE key to switch between MONO/STEREO
audio modes. When reception is poor, MONO mode is recommended for better clarity.
Manual Frequency Adjustment (Scan Mode)
- Press the TUNE+ or TUNE- keys to manually adjust the radio frequency 1 step at a time.
- When the desired station is reached, it can be saved into memory for quick access.
(See the "Radio Station Memory" section for further details.)
Function of the DISPLAY MODE key
artist, song title etc.), if it is available
(NOTE: ID3 is limited to 26 characters/tag).
4
Spectrum Analyzer
(music frequency graph)