Part 2: System Requirements & Installation; System Requirements; Hardware Installation - Newer Technology MaxPower User Manual

NewerTechnology MAXPower eSATA 6G PCIe 2.0
Part 2: System Requirements & Installation

System Requirements

Mac
Hardware: Intel-based Mac with available PCIe 2.0 or 1.0 slot
Operating System: Mac OS X 10.5 and later
PC
Hardware: Any computer with available PCIe 2.0 or 1.0 slot
Operating System: Windows 2000/XP/2003 and later

Hardware Installation

Before Installing the MAXPower eSATA 6G card...
• Make sure computer is turned off and unplugged from its power source
• Take appropriate electrostatic discharge precautions:
Step 1
Step 2
Step 3
Step 4
Step 5
(Windows 2000/
XP/2003 only)
Page 4
Your computer is a static-sensitive device. It is susceptible to invisible damage
if not protected during installation.
We recommend proper grounding by using a grounding strap. Make sure to
work in a clean and static-free area, and avoid wearing clothing that retains
static charges.
For more information, please visit:
Open the computer systems chassis and locate an unused PCIe 2.0 or 1.0 slot (x1, x4,
x8, or x16).
Remove the PCI slot cover.
Gently insert the MAXPower card into the PCIe slot and secure the bracket to the
computer chassis.
After installing the MAXPower card attach any eSATA storage devices to the card and
start your computer.
Windows 2000/XP/2003 versions do not have built-in AHCI support and therefore re-
quire driver installation* for the MAXPower eSATA 6G card to function. Use Windows'
New Hardware Install Wizard to install the drivers located on the included Driver
Installation CD.
*See the "Installation on Non-AHCI Systems" section for more details.
http://www.newertech.com/static