Fisher & Paykel ActiveSmart RF170 Installation Instructions And User Manual page 20

Cleaning care – special features
US
18
CA
To remove trays or fixed bins
For ease of removal, empty food from
■ ■
tray/bin first.
Hold the center front of the tray/bin
■ ■
handle.
Lift vertically to unclip from the runners
■ ■
and pull tray/bin towards you to remove.
Push runners back into refrigerator.
■ ■
To replace trays or fixed bins
With the runners pushed back into the refrigerator, place the tray/bin on top of the runners.
■ ■
Push the tray/bin back slowly until you feel it clip back onto the runners.
Important!
Ensure that trays and bins are securely clipped onto the runners before use.
■ ■
Bin and tray runners are pre-lubricated, and will not need to be re-lubricated during their life. Do
■ ■
not attempt to clean grease from the runners, as this will affect their ability to function. Do not
immerse runners in water.
Glass shelves
Clean with warm water and detergent or a glass cleaner. If cleaning the shelves without
removing from the cabinet use only warm water and detergent as a glass cleaner can damage
the plastic components of your refrigerator.
Bottle holder (where fitted)
Clean with warm water and detergent. The use of abrasive cleaners and solvents may
cause damage.
Permanently fixed bins and trays (Freezer drawer models only)
The freezer bins and trays in this model are permanently fixed. They cannot be removed from the
freezer compartment. To clean, simply wipe with a soft, damp cloth.
Important!
Many commercially available cleaning products contain solvents that may attack the plastic
components of your freezer and cause them to crack. It is important to use only warm water and
a small amount of liquid dishwashing detergent on any plastic components inside and outside
your freezer. Avoid using anti-bacterial cleaning products on either the interior or exterior of the
cabinet as they may cause rusting of metal components and cracking of plastic components.
Fig.11 Tray removal