Color Logic; Lint Filter; Permanent Press Drying Tips; Care And Cleaning - GE Dryer Use And Care Manual With Installation Instructions

This signal should always be used when drying
polyester knits or permanent press items which should
be removed as soon as the dryer stops to help prevent
setting of wrinkles.
If the signal is on and you choose the Extra Care
Cycle, you will hear the signal sound on and off
throughout the cycle. This reminds you that the
clothes are dry.

COLOR LOGIC

Select the correct FABRIC CARE setting. Match the
particular color below the words with the same color on the
Cycle Dial.
Example: Drying a load of clothing labeled permanent press.
Polyester Knits & Permanent Press Drying Tips
•DO NOT OVERLOAD-
Garments being dried or
dewrinkled should tumble
freely.
Don't overload your dryer. Crowded
loads don't dry efficiently and clothes
may be unnecessarily wrinkled. Loads
should look like this:
As a general rule, sort clothes by surface texture, fabric, colour and weight, as you would for your washer.
Dryer Exterior
Wipe off any spills or washing
compounds. Wipe or dust with a
damp cloth. Try not to strike the
surface with sharp objects.

Lint filter

Before every
dryer use, clean the
lint filter. Put your
moistened fingers at
one side of the filter
and wipe in a sideways
motion all the way
across to the other side.
OPERATING YOUR DRYER
•REMOVE CLOTHES
PROMPTLY-
To help prevent wrinkling,
remove clothes from the dryer
promptly at the end of the
drying cycles.
HOW TO LOAD THE CLOTHES
HOW TO SORT CLOTHES

CARE AND CLEANING

Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain
remover products if such products
are sprayed on or have direct
contact with the dryer.
CARE AND CLEANING
Start. Turn the Start knob or press the push
button to start the dryer. (Opening the door
during operation stops the dryer. To restart,
close the door and follow above directions.)
(Available on some models)
1. Choose the FABRIC CARE setting - for this load it
would be the EASY CARE MED HEAT (which is a
particular color).
2. Turn the Cycle Dial to the area that has the same color as
the FABRIC CARE setting you have chosen - for this
load it would be the EASY CARE PERM PRESS.
To keep your dryer
operating at peak
performance.
periodically, remove
the lint filter and
insert the suction hose
from your vacuum
cleaner into the
opening.
•PLACE ON HANGERS-
Permanent press and polyester
knit garments look best if
placed on hangers after drying.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products is
not covered by your warranty.
11