Control Panel - GE Dryer Use And Care Manual With Installation Instructions

WARNING – To reduce the risk of fire, electric shock, or injury to persons
when using your appliance read the IMPORTANT SAFETY INSTRUCTIONS
4
5
Features and appearances may vary.
Drying Selections. Select the proper heat on the Fabric Care selector for your
load.
Drying Automatic
Selections Cottons
Cottons
Regular Heat
Perm. Press
(or Easy Care)
Medium Heat
Knits/Delicates
Low Heat
Fluff
No Heat*
UltraCare
Gentle Heat
10
OPERATING YOUR DRYER
before operating this appliance.
1 3
1 3
Automatic
Perm. Press Timed UltraCare
(or Easy Care)
2
4
2
NOTE: Drying times will vary according to the type of heat used (Electric,
Natural gas or LP gas), size of load, types of fabrics, wetness of clothes, and
condition of exhaust ducts.
Cycle Selector. Turn the Cycle Selector to the desired cycle setting. The selector
may be turned in either direction. Select "Optimum" for preferred energy setting.
Extra Care Cycle. (Available on some models.)
The Extra Care cycle operates only with the Automatic cycles. Turn the Extra
Care knob to SET, and turn the Cycle Selector Dial to the desired amount of
heated drying time.
To minimize the wrinkle setting in clothes, the Extra Care cycle provides from 15
to 20 minutes of no-heat tumbling after the clothes are dry.
Use the End Cycle Signal to remind you to remove the dried laundry.
End Cycle Signal. (Available on some models.)
Set End Cycle Signal, if desired. This signal operates with any cycle on some
models. The control can be set ON and OFF or anywhere between OFF and
LOUD, depending on the model and desired sound level. The signal will start to
sound just before the end of the cycle to remind you to remove the clothes. To stop
the signal while sounding, turn the signal control to OFF.
5