Advertisement
HDMI input mode only Picture Noise Reduction Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a picture (Off / Min
/ Mid / Max) Not valid on PC signal Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen Set to "On" to display sharper
and more accurate colours (Off / On) For PAL or NTSC signal reception only Not valid on S-Video, Component, PC, HDMI and SD Card Press the OK
button to reset Viewing Mode on all inputs to default settings. Basic sound mode (Music / Speech) Increases or decreases level to enhance or minimise lower,
deeper sound output Increases or decreases level to enhance or minimise sharper, higher sound output Adjusts volume level of right and left speakers Adjusts
the volume of the headphones Surround sound settings (Off / On) Provides a dynamic enhancer to simulate improved spatial effects Adjusts volume of
individual programme or input mode Adjusts the low frequency sound (Over 30cm / Up to 30cm) If the back space between the TV and wall is over 30 cm,
If the back space between the TV and wall is within 30 cm, "Up to 30cm" is recommended. Select stereo / monaural (Mono / Stereo) (p. 45) Normally: Stereo
Stereo signal cannot be received: Mono M1 / M2: Available while mono signal is transmitted Analogue mode only Selects the initial setting for Audio tracks
(Dolby Digital / MPEG) If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select Dolby Digital:A method of coding
digital signals developed by Dolby Laboratories. Apart from stereo (2ch) audio, these signals can also be multi-channel audio. MPEG:An audio compression
method that compresses audio to small size without any considerable loss of audio quality. DVB mode only Selects the initial setting for digital audio output
signal from DIGITAL AUDIO OUT terminal (Auto / PCM) Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM. PCM:Dolby
Digital is output as PCM. MPEG is output as PCM. DVB mode only You can adjust the audio level of MPEG output from DIGITAL AUDIO OUT terminal as
the initial setting 0dB to -12dB in -2dB reductions DVB mode only Selects the preferred language for DVB multi audio (depending on the broadcaster) Select
35) Auto: Automatic detection of digital or analogue sound source Digital: HDMI cable connection Analogue: HDMI-DVI adapter cable connection HDMI
input mode only HDMI2 terminal is for digital signal only No setting for HDMI2 available Press the OK button to reset the present Sound Mode to the default
settings P-NR 3D-COMB Reset Picture Defaults Mode Bass Treble Balance Headphone Volume Surround Volume Correction Speaker Distance to Wall MPX
· · · · · · · · · · · · · DVB Audio Preference SPDIF Selection MPEG Optical Level Audio Selection HDMI1 Input Reset Sound Defaults 24 Menu list Menu Item
DVB Favourites Edit DVB Service List Analogue Service List Auto Tuning DVB Manual Tuning Analogue Manual Tuning Add New DVB Services New
Service Message DVB Signal Display Off Timer Teletext Shipping Condition System Update Power Save Side Panel Adjustments / Configurations
(alternatives) Creates list of favourite programmes (p. 29) Skips the unwanted DVB programmes (p. 29) Skips the unwanted Analogue programmes or edits
Analogue programmes (p. 29) Automatically sets the programmes received in the area (p. 31) Sets the DVB programmes manually (p.
31) Sets the Analogue programmes manually (p. 31) Adds new DVB services (p. 31) Selects whether to give a notification message when a new DVB service is
found (Off / On) (p. 31) Checks the DVB signal condition (p. 31) Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Teletext
18) Resets all settings, for example, when moving house (p. 32) Downloads new software to TV (p. 27) Reduces brightness of picture to economise on power
consumption (Off / On) Increases the brightness of the side panel (Off / Low / Mid / High) The recommended setting is "High" to prevent panel "image
"Over 30cm" is recommended.
to fit the input signal (Auto / Digital / Analogue) (p.
display mode (TOP (FASTEXT) / List) (p.
retention" Tuning Menu · How to Use Menu Functions (picture, sound quality, etc.
You're reading an excerpt. Click here to read official PANASONIC
TH-42PZ80A user guide
http://somemanuals.com/dref/2186088
Advertisement
