Changing The Routing Method - Honda 2008 Pilot Navigation System Navigation Manual

Honda 2008 pilot
Hide thumbs Also See for 2008 Pilot Navigation System:
Table of Contents

Advertisement

Main Menu
Driving to Your Destination

Changing the Routing Method

The system lets you select the way you
want to drive to your destination. Select
the desired method using the CHANGE
METHOD scroll bar back ( ) or
forward ( ) buttons.
The following methods are available to
change after you have set a destination:
While on a map screen, press the
MENU button. The Change route by
screen will be displayed. Say or select
Change Routing Method, and the
screen changes to:
44
Navigation System
• "Direct Route" (the factory default) is
the route that is the quickest (least
time) and is usually the best choice. If
you choose any other method, it
becomes the new default for all future
routing. Make sure to check the
routing method if the displayed route
is not what you expected to see.
• "Easy Route" produces a route with
the least turns.
• "Maximize Freeways", "Minimize
Freeways", and "Minimize Toll
Roads" are also available.
NOTE:
If the trip is greater than 100 miles, then
"Minimize Freeways" and "Minimize
Toll Roads" may be grayed out. This is
normal.
2008 Pilot
The generated route may not be the
route you would choose. For safety
reasons, the system generally applies the
following rules to your route:
• It tries to avoid "short cuts" through
residential areas.
• Right turns are favored over left turns
or U-turns.
• Restricted turns (turns that cannot be
made during certain hours), are not
used for routing during any time of
the day.

Advertisement

Table of Contents
loading

Table of Contents