Table of Contents
Advertisement
Connecting to a Windows NT 4.0 Server
Microsoft Windows for Workgroups v3.11
13 Click "OK" at the "Network Setup" dialog box.
14 If needed, enter changes to the "Microsoft Windows Network Names"
dialog box and click "OK".
15 Windows will prompt for the location of several files. Type the path to the
file locations and click "OK". This step will be repeated several times until
all of the files Windows needs have been copied.
16 Click "OK" on the next dialog box indicating that the CONFIG.SYS,
AUTOEXEC.BAT, and SYSTEM.INI have been modified.
17 To complete the installation, remove the driver disk and click on "Restart
Computer".
22
Advertisement
Table of Contents
