Edit Avoid Area - Honda 2012 Fit Navigation Manual

Routing & GuidanceEdit Avoid Area

Edit Avoid Area

H INFO button

Setup
"Edit"
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when
the system calculates routes to your destination.
The following items are available (after an area is set):
• View Area Map: Displays the selected avoid area on the map.
• Delete: Deletes the selected avoid area.
44
 
Other Routing & Guidance
1. Select New Area or an existing
area to edit.
2. Select Edit Name to label the area
to avoid.
3. Enter a name or title. Select OK.
4. Select Edit Area to define the area
to avoid.

Edit Avoid Area
1
The avoid areas are shared with User 1 and
User 2. For example, if User 1 specifies some
avoid areas, User 2 can also use them for setting
a route.
The maximum size of an "avoid area" is about 1
square mile.
If your selected area contains a freeway, you are
asked "Do you want to avoid freeways?"
Answering "No" allows you to use a route
through an avoid area on a freeway without any
pop-up messages.
You can select areas to avoid, however you
cannot select roads or areas that you want the
system to use for routing.
You can enter characters for the name until the
input field is full.
Edit Avoid Area