Miscellaneous Questions - Honda 2012 Fit Navigation Manual

Honda 2012 fit
Hide thumbs Also See for 2012 Fit:
Table of Contents

Advertisement

Miscellaneous Questions

Problem
My clock frequently changes forward and backward by
one hour.
The clock changes even when I am not driving near a
time zone boundary.
My state does not observe daylight saving time. How
do I turn off this feature?
Daylight saving time has started, but the navigation
system did not change time even though Auto
Daylight is set to ON.
The navigation system automatic daylight feature is
not switching the navigation system clock on the
correct dates.
The navigation system clock switched by one hour for
no apparent reason.
My battery was disconnected or went dead, and the
navigation system is asking for a code.
How do I change the interface language?
The clock setting is automatically updated based on your GPS location. If you live and
work on the boundary between two time zones, you can turn off this feature.
P. 47
2 Clock Adjustment
The time zone boundaries are only approximated in the navigation system. Depending
on the geography of the time zone boundary, the switch to a different zone can be
erratic.
P. 47
2 Clock Adjustment
Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to Off.
P. 47
2 Clock Adjustment
The automatic daylight saving time feature does not work in regions where the
daylight saving time system has not been adopted.
Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to On. Note that the automatic daylight feature
does not work in regions where the daylight saving time system has not been
adopted.
P. 47
2 Clock Adjustment
You may be driving near a time zone boundary.
2 Clock Adjustment
P. 47
Your vehicle comes with a label in the Owner's Manual kit that includes the system's
security code and serial number. You should keep this label in a safe place outside
your vehicle. If you cannot find it, contact your dealer.
Press the INFO button. Select Setup > Other > Language, and set the language to
English, Français, or Español.
TroubleshootingMiscellaneous Questions
Solution
165

Advertisement

Table of Contents
loading

Table of Contents