Practice (Connecting Three Patterns) - Baby Lock Ellisimo & Ellisimo BLSO-BF2 Instruction And Reference Manual

4. Press
process. For safety please make sure area
around needle is clear prior to pressing
.
→ Setting the needle drop point begins.
e
The operation is finished when "OK" appears.
If "NG" appears, remove the sticker, and then
follow the on-screen instructions to repeat
steps 3 and 4 of Step
to set the position are not successful, contact
your nearest Baby Lock retailer.
f
Remove the sticker, and then turn off the
machine.
Note
• When using the camera to connect patterns, use the
needle that was installed when the camera needle
position was set.
14
to initiate the calibration
d
. If multiple attempts

Practice (Connecting Three Patterns)

In order to practice aligning pattern edges by using the
camera, we will connect three patterns as shown
below. These 3 patterns for practicing are available on
the included CD.
manual
a
Pattern1X.pes
b
Pattern2X.pes
c Pattern3X.pes
Note
• Use USB media or a computer to access the pattern
files.
a
Select the first pattern (1) for practicing, and
then press .
b
Thread the machine with the upper thread
and the bobbin thread.
sample