Motorola XPRT User Manual page 52

Connecting New Devices
Note:
This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device – to
connect again, just turn on the device.
1.
Make sure the device you are pairing with is in
discoverable mode.
Note:
Refer to the guide that came with the device for details.
2.
Touch > Settings
Bluetooth settings
3.
Touch
Bluetooth
power is already on, touch
4.
Touch a device to connect.
5.
If necessary, touch
(like ) to connect to the device. When the
0000
device is connected, the Bluetooth indicator
appears in the status bar.
46 2I. Bluetooth & Wi-Fi
> Wireless & networks
.
to turn on and scan. If Bluetooth
Scan for devices
, or enter the device passkey
OK
Note:
Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the
laws and drive safely.
The Bluetooth Enhanced Audio setting is not
recommended for older Bluetooth headsets, as it may
not deliver acceptable sound quality.
Reconnecting Devices
To automatically reconnect your phone with a
paired device, simply turn on the device.
>
To manually reconnect your phone with a paired
device, touch the device name in the
devices
.
Disconnecting Devices
To automatically disconnect your phone from a
paired device, simply turn off the device.
To manually disconnect your phone from a paired
device, touch the device name in the devices list,
and then touch
.
list.
>
Disconnect
Bluetooth
.