Installing The Ir Driver In Windows 9X; Installing The Ir Driver In Macintosh Os - HP Hewlett-Packard User Manual

Installing the IR Driver in Windows 9x

If your version of Windows does not have the
HP Fast InfraRed driver pre-installed, you can download
it from the Internet at no charge. The address is
http://www.microsoft.com/windows. Use the search
feature on the web page to locate the correct driver.
After downloading the Infrared driver, complete these steps:
1 Start the SETUP.EXE program to invoke the Windows 95
Add Infrared Device wizard.
When the wizard announces New Hardware Found
2
events for the IR serial and parallel ports, you can enable
the IR device immediately after the wizard is finished.
3 Restart the computer.

Installing the IR Driver in Macintosh OS

The HP Fast Infrared driver is pre-installed with Mac OS 8.5
or newer. If your Mac OS is older than 8.5, you can download
the Apple LaserWriter 8.6 driver, which supports IR printing,
from the World Wide Web at no charge from www.apple.com.
8 HP Fast InfraRed Receiver
EN