Download Print this page

Sony MDR-10RNC Operating Instructions

Noise canceling headphones

Advertisement

Quick Links

Noise Canceling
Operating Instructions
Headphones
Mode d'emploi
Manual de instrucciones
MDR-10RNC
© 2013 Sony Corporation Printed in Malaysia
If you install the Smart Key app* from Google Play store, the
English
Noise Canceling Headphones
track and volume adjustment on your smartphone will be
WARNING
enabled with Multi-function button.
*
Only for Xperia
phones. The app may not be available in
TM
The validity of the CE marking is restricted to only those
some countries and/or regions.
countries where it is legally enforced, mainly in the countries
Depending on the music playback application, it may not
EEA (European Economic Area).
operate as you set. In this case, change the headset setting
on the music playback application.
The device complies with Part 15 of the FCC Rules.
You may need to update the application according to the
Operation is subject to the following two conditions: (1)
Android OS version-upgrade in the future.
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
Si vous installez l'application Smart Key* à partir de Google
interference that may cause undesired operation.
Play, vous pourrez activer les réglages de piste et de volume
sur votre smartphone grâce à la touche multifonction.
Note
*
Uniquement pour les téléphones Xperia. Il est possible
This equipment has been tested and found to comply
que l'application ne soit pas disponible dans certains pays
with the limits for a Class B digital device, pursuant to Part
ou certaines régions.
15 of the FCC Rules. These limits are designed to provide
Selon l'application de lecture de musique, cela peut ne
reasonable protection against harmful interference in a
pas fonctionner comme vous l'avez défini. Dans ce cas,
residential installation. This equipment generates, uses
modifiez le réglage du casque sur l'application de lecture
and can radiate radio frequency energy and, if not installed
de musique.
and used in accordance with the instructions, may cause
Vous devrez peut-être mettre à jour l'application en
harmful interference to radio communications. However,
fonction de la mise à jour de la version d'Android OS dans
there is no guarantee that interference will not occur in a
le futur.
particular installation. If this equipment does cause harmful
Si se instala la aplicación Smart Key* de la tienda de Google
interference to radio or television reception, which can be
Play, se habilitarán los ajustes de pista y volumen en su
determined by turning the equipment off and on, the user is
teléfono inteligente con el botón multifuncional.
encouraged to try to correct the interference by one or more
of the following measures:
*
Solo para teléfonos Xperia. Puede que la aplicación no
Reorient or relocate the receiving antenna.
esté disponible para algunos países y/o regiones.
Increase the separation between the equipment and
Dependiendo de la aplicación de reproductor de música,
receiver.
puede que no funcione como lo haya configurado. En
Connect the equipment into an outlet on a circuit different
tal caso, cambie la configuración de los auriculares en la
from that to which the receiver is connected.
aplicación de reproductor de música.
Consult the dealer or an experienced radio/TV technician
Puede que requiera actualizar la aplicación en función de
for help.
una actualización futura de la versión de Android OS.
https://play.google.com/store/apps/details?id=com.
You are cautioned that any changes or modifications not
sonymobile.extras.liveware.extension.smartkey&feature
expressly approved in this manual could void your authority
to operate this equipment.
How to use/Mode d'utilisation/Modo de uso
4-468-484-11(1)
1
Installing a battery/Installation d'une pile/Colocación de la pila
 indication
 indication
Indication 
Indication 
Indicación 
Indicación 
Tactile dot (on the left)
Point tactile (à gauche)
US
Punto táctil (a la
izquierda)
FR
2
Connecting/Raccordement/Conexión
ES
Inline remote and microphone cord for smartphones
Cordon avec télécommande et micro intégrés pour smartphones
Cable con control remoto y micrófono integrados para teléfonos
inteligentes
4
Wearing and controlling/Port et contrôles/
Colocación y control
Multi-function button
Touche multifonction
Botón multifuncional
Compatible products
Using the AI Noise
of inline remote and
Canceling function
microphone cord for
The AI Noise Canceling function analyzes environmental
ambient sound components and automatically selects the
smartphones
most effective noise canceling mode.
When you press the AINC button while the POWER switch
is set to "ON, " beep sounds and the headphones start the
Use this unit with smartphone.
analysis. During the analysis (approx. 3 seconds), the POWER
Notes
indicator blinks, and the volume level is reduced from the
 Depending on the model of smartphone, the microphone
headphones.
of this unit may not function, or the volume level may be
When the analysis is completed, the most effective noise
low.
canceling mode is selected and the volume level is revert to
 This unit is not guaranteed to operate digital music
the previous level.
players.
Noise canceling mode types
NC Mode A:
Using the Multi-function
NC Mode B:
button
NC Mode C:
Press once to answer the call, press again to end; press to
play/pause a track.
Tips
Available operations for iPhone
When the headphones are turned on, NC Mode A is set.
Plays/pauses a track of the connected iPhone with a single
Press the AINC button again to reset the noise canceling
press. Skips to the next track with a double press. Skips to
mode if ambient noise has changed, such as when you
the previous track with a triple press. Starts the "VoiceOver*"
move outdoors from a room.
feature with a long press (if available).
Hold down for about two seconds to reject an incoming
call. When you let go, two low beeps confirm the call was
Beep sound and
rejected.
*
Availability of the "VoiceOver" feature depends on iPhone
indicator status
and its software version.
Notes
Status/Function
 The button function may vary depending on the
Power off
smartphone.
 Be careful not to unintentionally press the button when
Power on
you carry your smartphone with the inline remote and
AINC
microphone cord connected.
Low battery
(1)
Smartphone
Digital music player, etc.
Smartphone
Lecteur musical numérique, etc.
Teléfono inteligente
Reproductor digital, etc.
Connecting cord
Cordon de raccordement
Cable conector
Using the AINC function/Utilisation de la fonction
RBAI/Uso de la función de inteligencia artificial de
supresión de ruido
Microphone
Micro
Micrófono
Notes on use
What is noise canceling?
The noise canceling circuit actually senses outside noise
with built-in microphones and sends an equal-but-opposite
canceling signal to the headphones.
Notes on the noise canceling function
Adjust the earpads so that they cover your ears, otherwise
noise canceling will not function properly.
The noise canceling effect may vary depending on how
you wear the headphones.
Do not cover the microphone of the headphones with
your hands. The noise canceling function may not work
properly.
Noise mainly in an airplane is effectively
reduced.
Noise mainly in a bus or a train is effectively
reduced.
Noise mainly found in an office environment
(PC, copier, air ventilation, etc.) is effectively
reduced.
Microphone
After you turn on the power of the headphones, you may
hear a slight hiss. This is the operating sound of the noise
canceling function, not a malfunction.
The noise canceling function works for noise in the low
frequency band primarily. Although noise is reduced, it is
not canceled completely.
The noise canceling effect may not be pronounced in a
very quiet environment, or some noise may be heard.
Beep sound
POWER indicator
When you use the headphones in a train or a car, noise
may occur depending on street conditions.
No beep
Lights off
Howling may occur if you do not wear the headphones
Beep once
Lights on
correctly.
Beep twice
Blinks twice
Howling may occur if you place an object such as finger
Long beep
Blinks quickly
close to inside of the headphones. Keep it away from the
(2 seconds)
(30 seconds)
headphones.
Mobile phones may cause interference and noise. Should
this occur, locate the headphones further away from the
mobile phone.
Notes on using on the airplane
Do not use the headphones when use of electronic
equipment is prohibited or when use of personal
headphones for in-flight entertainment services is
prohibited.
Troubleshooting
No sound
Replace the battery with a new one.
You can use the headphones even without turning on the
power. In this case, the noise canceling function, Digital
Equalizer and S-Master are not active, and the headphones
operate as passive headphones.
Check the connection of the headphones and the
equipment.
Check that the connected equipment is turned on.
Turn up the volume of the connected equipment.
The noise canceling effect is not sufficient
The noise canceling function is effective in low frequency
ranges such as airplanes, trains, or offices (near air-
conditioning, etc.) and is not as effective for higher
frequencies, such as human voices.
Turn on the headphones.
3
Turning on the power/
Distorted sound
Mise sous tension/Encendido
Turn down the volume of the connected equipment.
Power does not turn on or the headphones
do not operate properly
Check if the battery has expired (the POWER indicator
lights off ) and the battery is inserted in the correct
orientation. Replace the battery with a new one or reinsert
the battery in the correct orientation.
No operation works
Set the POWER switch of the headphones to "OFF",
confirm the connections, and then set the POWER switch
back to "ON".
The connected smartphone does not work
Check if the cord is connected correctly. Connect the L
type plug to the smartphone and the other plug to the
headphones.
After use
Turn off the power of the headphones.
Features
Après utilisation
Éteignez le casque.
Digital noise canceling headphones with Sony's unique
Después del uso
DNC software Engine and Dual Noise Sensor Technology:
Apague los auriculares.
High precision canceling signal generated by digital signal
processing and microphones located both inside and
outside the housings enables outstanding noise canceling
performance.
Automatic AI (Artificial Intelligence) Noise Canceling
function
Automatic selection of the optimal noise canceling mode
based on intelligent analysis of environmental ambient
noise.
Digital Equalizer and full digital S-Master amplifier
Delivers ideal frequency response and high-quality music
reproduction with full digital processing.
Enfolding structure
Notes on handling
Pressure-relieving cushions, tailored for the ears, provide a
wrap-around feel with acoustic sealing to deliver powerful
To disconnect the cord, pull it out by the plug, not the
lows.
cord. Otherwise the cord may break.
Lasting comfort
When connecting the cord, make sure to fully insert the
The lightweight and super soft cushions allow for
plug. If the plug is not fully inserted, no sound may result.
comfortable wearing over a long time.
Because of the difference in pin configuration of four-
Detachable cord
conductor stereo mini plugs, some smartphones cannot
3.5 mm connecting cord, and inline remote and
be used with the headphones.
microphone cord for smartphones
Because the headphones are designed to fit closely in your
ears, forcing them against your ears may result in eardrum
damage. Avoid using the headphones where they are
liable to be struck by people or other objects, such as a
Specifications
ball, etc.
Pressing the headphones against your ears may produce a
diaphragm click sound. This is not a malfunction.
General
Clean the headphones with a soft dry cloth.
Type
Closed, dynamic
Do not leave the plug dirty otherwise the sound may be
Driver units
40 mm, dome type (CCAW adopted)
distorted.
Power handling capacity
Be sure to consult a Sony dealer when the earpads
100 mW
become dirty or damaged, or when the headphones
Impedance
50 Ω at 1 kHz (when the power is on)
require repair work.
24 Ω at 1 kHz (when the power is off)
Do not leave the headphones in a location subject to
Sensitivity
101 dB/mW (when the power is on)
direct sunlight, heat or moisture.
100 dB/mW (when the power is off)
Do not subject the headphones to excessive shock.
Frequency response
Handle the driver units carefully.
6 Hz – 24,000 Hz
If you feel drowsy or sick while using this headphones,
Total Noise Suppression Ratio
1)
stop use immediately.
Approx. 22 dB
Power source
DC 1.5 V, 1 × LR03 (size AAA) battery
Notes on headphones
Mass
Approx. 205 g (7.3 oz) including battery,
High volume may affect your hearing. For traffic
not including cord
safety, do not use while driving or cycling.
Talk microphone Open circuit voltage level
–40 dB (0 dB = 1 V/Pa)
Battery life
As headphones reduce outside sounds, they may cause a
traffic accident. Also, avoid listening with your headphones
Battery
Approx. hours
in situations where hearing must not be impaired, for
Sony alkaline battery
20 hours
example, a railroad crossing, a construction site, etc.
LR03 SIZE AAA
Note on static electricity
Note
In particularly dry air conditions, noise or sound skipping
The supplied battery was included in the package during
may occur, or mild tingling may be felt on your ears. This is a
manufacturing (as a convenience to the user), it is possible
result of static electricity accumulated in the body, and not a
that the battery life may be depleted by the time of
malfunction of the headphones.
purchase. The actual life of the supplied battery may be
The effect can be minimized by wearing clothes made from
shorter than the standard time described in this manual
natural materials.
when using a fresh battery.
If you have any questions or problems concerning the
When the battery is low
system that are not covered in this manual, please consult
the nearest Sony dealer.
Replace the battery with a new one when the POWER
indicator blinks quickly or lights off.
Included items
Headphones (1)
Connecting cord (1.5 m (59 1/8 in), gold plated L-shaped
stereo mini plug) (1)
Inline remote and microphone cord for smartphones
(1.2 m (47 1/4 in), four-conductor gold plated L-shaped
stereo mini plug) (1)
AAA battery (1)
Plug adaptor for in-flight use
5)
(1)
Carrying case (1)
Operating Instructions (1)
Warranty card (USA) (1)
Warranty card (Canada) (1)
1)
Under the Sony measurement standard.
2)
Equivalent to approx. 99.4% reduction of energy of sound
compared with not wearing headphones.
3)
At 1 kHz, 0.1 mW + 0.1 mW output
4)
Time stated above may vary, depending on the
temperature or conditions of use.
5)
May not be compatible with some in-flight entertainment
services.
Design and specifications are subject to change without
notice.
iPhone is a trademark of Apple Inc., registered in the U.S.
and other countries.
Android is a trademark of Google Inc.
Xperia is a trademark of Sony Mobile Communications AB.
2)
3)
4)

Advertisement

loading

Summary of Contents for Sony MDR-10RNC

  • Page 1 Dans ce cas, NC Mode A: Noise mainly in an airplane is effectively – Be sure to consult a Sony dealer when the earpads residential installation. This equipment generates, uses 100 mW modifiez le réglage du casque sur l’application de lecture...
  • Page 2 à proximité de l’intérieur du casque. funciona La disponibilité de la fonction « VoiceOver » dépend de moteur logiciel DNC exclusif à Sony, ainsi que de la “VoiceOver” depende del iPhone, así como de la versión de –...