Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.
1
Rotate the mode dial to .
2
Set the desired options.
•
For a list of options, refer to "Shooting options". (p. 61)
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press [Shutter] to capture the photo.
Program shift
If you use this function, you can select the desired shutter speed and aperture value
while maintaining the same brightness. The shutter speed and aperture value are
changed as in the following rules.
Command dial direction Changing the exposure value
+
-
47
Extended functions
Decreased shutter speed + increased aperture
Increased shutter speed + decreased aperture