Opel ADAM Owner's Manual page 187

4. Lift the spare wheel holder a bit by
hand and unhook the catch.
5. Lower the spare wheel holder.
6. Lift the spare wheel holder a bit by
hand and detach the safety cable.
7. Lower holder all the way and
remove spare wheel.
8. Change the wheel 3 181.
The damaged wheel has to be
secured in the load compartment,
see below.
9. Lift the empty spare wheel holder
and insert the safety cable.
10. Lift the spare wheel holder farther
and engage in catch. The open
side of the catch must point in the
direction of travel.
Vehicle care
11. Close the empty spare wheel
holder by turning the hexagon bolt
clockwise successively using the
wheel wrench.
12. Stow wheel wrench and the jack
in the tool box in vehicle floor.
13. Close the load compartment floor.
Stowing a damaged wheel in the
load compartment
The spare wheel holder is not
designed for other tyre sizes than the
spare wheel.
A damaged wheel wider than the
spare wheel has to be stowed in the
load compartment and secured with a
strap. Vehicle tools 3 170.
Wheels with tyre size up to
195/55R16
1. Remove load compartment cover
and lift up load compartment floor.
Stow both behind the raised up
backrests of the rear seats.
185