Changing The Hold Mode; Entering Location By Zip Code - AMX ENV-VST-C Operation/Reference Manual

Programming

Changing the Hold Mode

You can change the hold mode by accessing the Hold Mode menu from the Heat|Cool screen. The menu appears directly
above the Heat|Cool button and is labeled with the current Hold Mode setting (FIG. 61).
FIG. 61 Hold Mode menu
To change the Hold mode:
1.
Press Heat|Cool on the Main screen to access the Heat|Cool screen (FIG. 56).
2.
Press the current fan mode to open the Hold Mode menu.
3.
Select the mode you want. The menu closes once you make a selection.
You can access the Settings screen by pressing Weather on the Main page, then pressing the Settings tab.
FIG. 62 Settings screen

Entering Location by Zip Code

To enter a location by Zip code:
1.
Press Weather on the Main page to navigate to the Settings screen (FIG. 62).
2.
Press ZIP. A pop-up screen opens.
3.
Enter the 5-digit zip code.
4.
Press Done.
Pressing Done returns you to the Select Location page and displays the corresponding city at the top of the page.
66 ENV-VST-C - Operation / Reference Guide