AMX ENV-VST-C Operation/Reference Manual page 56

Advanced Thermostat Operations
9.
Use the navigation buttons to highlight Thermostat Setup, and press Mode/Select to access the Thermostat Setup
screen.
10.
Use the navigation buttons to highlight More, and press Mode/Select to access the second Thermostat Setup screen
(FIG. 50).
FIG. 50 Thermostat Setup screen (2 of 2)
11.
With Balance Point highlighted, press Mode/Select to activate it.
12.
Press Mode/Select to indicate the balance point.
13.
Use the navigation buttons to highlight Exit, and press Mode/Select to return to the second Advanced Setup screen.
The Balance Point option is only available if your thermostat is configured to operate as a heat
pump.
50 ENV-VST-C - Operation / Reference Guide