How To Identify Parts Of Vacuum Cleaner; Maintenance Schedule - Eureka 3281 Series Owner's Manual

How to Identify Parts of Vacuum Cleaner

Hose
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.
Filter cover
Filter
DCF21
Screen
HEPA filter
HF7
Brush Roll
2 Eureka Customer Service HELPLINE 1-800-282-2886
Handle
Turbo nozzle
Power switch
Filter, cover and screen
(located inside dust cup)
Dust cup
Nested crevice tool
& extension wand
HEPA filter compartment
Height adjustment knob
Brush roll cover

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.
EXT-U Belt
SPECIAL FEATURES
Available on some models
Turbo nozzle clip
Turbo nozzle
Handle
release
DUST CUP – Empty after each use
Press lever to release bottom lid.
Debris will empty.
FILTER DCF21 – Clean or replace regularly, to maintain suction
Empty cup. Pull back
latch to lift off lid.
Rinse dust cup;
dry thoroughly.
HEPA FILTER HF7 – Replace within 6 months
Lay cleaner flat, grasp cover and pull off.
EXT-U BELT – Replace worn, cut or out of shape belt
Cord retainer
Carrying handle
Quick release cord wrap
Power cord
Dusting brush
Lower cord wrap
Hose retainer
Close bottom lid
until it clicks.
Brush debris from filter,
cover and screen. Wash and
Pull out filter cover,
dry thoroughly, as needed.
filter and screen.
Reinstall screen, Align lid at front; press down
filter and cover. until lid snaps into place.
Lift out filter and replace.
BRUSH ROLL – Clean monthly
www.eureka.com