Vesa Mount For Your Computer - Planar PA1575R User Manual

VESA Mount For Your Computer

This computer conforms to the VESA Flat Panel Mounting Physical Mounting Interface
Standard which defi nes a physical mounting interface for fl at panel computers, and
corresponding with the standard mounting devices of fl at panel computer, such as wall and
table arms. The VESA mounting interface is located on the back of touch computer.
To mount the computer on a swing arm or other mounting fi xture, follow the instructions
included with the mounting fi xture to be used, please note to mount touch computer to the
devices (either mounting fi xture or swing arm) what conforms to the UL listed.
VESA
Mounting
Interface
!
Warning!
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4 screws diameter with proper length to mount your
monitor.
Please note: the mounting stand must be able to support at least 11 lbs ( 5Kg).
75.0 mm
7
Slots ( x 4)