Audio/infrared board
Description
Audio/infrared board (includes cable)
Before removing the audio/infrared board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover and keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
Remove the audio/infrared board:
1.
Disconnect the audio/infrared board cable (1) from the LIF connector on the system board.
2.
Release the clip (2) built into the base enclosure that secures the audio/infrared board.
3.
Lift the audio/infrared board (3) straight up to remove it from the base enclosure.
Battery on page
52).
Hard drive on page
62).
Optical drive on page
Switch cover and keyboard on page
Speaker assembly on page
Display assembly on page
Top cover on page
84).
55).
74).
76).
Component replacement procedures
Spare part number
486797-001
69).
89