Table of Contents
Advertisement
Windows 98 Installation
1.
Connect the rectangular end of the USB cable
into the USB host port of your computer, and
the square end into the USB port of your
network
automatically detect the device. Click Next
to continue.
2.
Select Search for the best driver for your
device (Recommended) and click Next.
3.
Insert the device driver into your CD-ROM
drive.
Windows 98 to the location where the driver
stored and click Next.
search for the suitable driver for the software
installation need.
4.
Click Next. Windows 98 will start copying
necessary files onto your system.
5.
Click Next.
6.
Select the switch protocol that your telephone
company uses and click Next.
7.
Enter the telephone numbers that your ISP
provided and click Next.
8.
Click Finish.
9.
When asked to supply the original Windows
98 CD-ROM, you need to insert it into your
compact disc drive. Click OK.
10. Click Finish to complete the software
installation.
11. To verify if your network adapter exists in
your computer and well enabled, you can
perform the following steps.
adapter.
Select Specify a location, direct
- 4 -
Windows
Windows 98 will
98
will
Advertisement
Table of Contents
