Table of Contents
Advertisement
Overview
The PCI and PMC Adapters may be installed in any PCI
bus-equipped system. The PCI SCSI-2 Adapter is designed to be
installed in PCI expansion slots on the motherboard. The PMC
SCSI-2 Adapter resides in a PMC mezzanine in systems so
equipped.
This chapter describes the procedure for physically installing the
adapters and includes the following:
Please observe all special notes and precautions.
For technical specifications on the PCI and PMC Adapters, see
Appendix
Tools Required
The only tools required are a grounding strap and a #1 Phillips
head screwdriver.
Note
2Hardware Installation
Unpacking the adapter board
Installing the board in a host expansion slot
Connecting the adapter board to the SCSI-2 bus
A.
The PCI SCSI-2 Adapter is a plug-and-play device with
systems that are compliant with the PCI Local Bus
Revision 2.1 specification. Systems that are not
compliant may require manual configuration via a PCI
Device Configuration menu in the BIOS. Refer to your
host systemÕs documentation for PCI Device
Configuration.
2
2-1
Advertisement
Table of Contents
