Table of Contents
Advertisement
Supported Software Drivers
The software drivers for the PCI and PMC Adapters are contained
in the Windows NT 3.51 and the AIX 4.1 operating systems,
respectively.
Note
The PCI and PMC Adapters are sensitive to static
!
electricity. Do not touch any components or metal parts
without using a grounding strap. To prevent damage
Caution
from electrostatic discharge, handle the adapter only
while wearing a grounding strap.
System Requirements
Minimum system requirements to operate the PCI and PMC
Adapters are as follows:
The PMC Adapter and the PCI Adapter use the same
software drivers. Whether the adapter is installed to a
PCI slot (PCI Adapter) or to a PMC mezzanine slot
(PMC Adapter), the selection of a driver is based upon
the operating system in use by the host computer; not
by the configuration of the system hardware.
Hardware:
Ð Power PC systems operating under Windows NT 3.51 or
later
Ð Power PC systems operating under AIX 4.1 or later
Bus Architecture:
Ð The I/O interface must comply to PCI Local Bus
specification Revision 2.0 or greater
16MB total system memory.
Supported Software Drivers
1
1-3
Advertisement
Table of Contents
