E. Motorized Diseqc1.2 - Topfield TF5000PVR Masterpiece User Manual

MENU OPERATIONS
Motorized DiSEqC 1.2
If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions.
A. Satellite Name
Select a satellite name that will be used to identify a motor position.
B. Tuner Select
Select a tuner that is connected with DiSEqC 1.2 system.
C. Transponder
Select the transponder to catch the strong signal. Select the TP from TP list box to get
the strong signal.
D. LNB Setting
Please refer to LNB setting of this chapter.

E. Motorized DiSEqC1.2

Select Enable or Disable. If you are using DiSEqC1.2 antenna, set to Enable.
F. DiSEqC Command Mode
Change the current mode between User and Installer modes.
-User: This mode is used to fine-tune the position of the motor for better reception.
-Installer: This mode is used to search for the position of a satellite manually.
G. Movement: In case of User mode, the movement is adjustable by fine-tuning.
In case of Installer mode, the movement is adjustable by East , West going command.
34