Operational Panel; Functions Of Buttons - Clarion NX404 Owner's Manual

4.OPERATIONAL PANEL

[Microphone]
[MENU]
[NAVI/AV]
[POWER/VOL]
[IR]
[RESET]
[microSD slot]
[Cover]
[AUX IN]
Only navigation map card is available and don't remove it when unit is power on

Functions of Buttons

[POWER/VOL] Knob
• Press this knob to turn on the power.
• When the power is already on, it moves to the
Navigation mode. If Navigation mode is displayed, it
moves to the Navigation menu.
• Keep pressing this knob more than 2 second to turn
off the power.
• Turn this knob to left or right to decrease or increase
the volume of the system.
[NAVI/AV] Button
• Press this button to display NAVI, press again to
return current source.
• Press and hold this button for 2 seconds to display
the Dimmer setting menu.
[ ] Eject
• Press to eject disc from the unit.
[MENU] Button
• Press this button to display main menu; press again
to return current source.
• Press and hold this button for 2 seconds to turn off
the monitor. Press any place of the screen to turn on
the monitor again.
[RESET] Button
• Press this button to hardware reset the unit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[microSD slot ]
Note: The microSD card is only for navigation. Please
don't insert microSD card for other purpose. After
insertion of microSD card for MAP, don't remove it;
otherwise, the navigation function will be disabled.
[AUX IN]
AUX 1 Connector.
[Microphone]
This is used for Bluetooth phone.
[IR] SENSOR
•Receiver for the remote control unit (operating range:
30 degree in all directions).
[ ]
[Disc slot]
NX404
11