Tips And Tricks - Midland XTC300 Quick Start Manual

Tips and Tricks

Problem
Batteries
Camera not turning on Make sure battery is fully charged .
Recording
Make sure the switch is pushed all the
way forward . If the record LED does
not come on, turn off the device and
Camera not recording
reinstall the battery .
Verify available memory .
Micro SD card
Ensure the Micro SD card is inserted
properly .
Micro SD card not reading Plug camera into the computer to
verify it has available storage .
Attempt formatting process .
Video Playback
Verify the camera is plugged into a
USB 2 .0 device .
Remove other unused USB devices .
Transfer video to computer before
Slow or choppy video
viewing .
Verify computer meets minimum
requirements .
Verify proper codec is installed .
Solution
www.midlandusa.com
Tips and Tricks
Problem
Video Downloading
Verify the camera is plugged into a USB
2 .0 device . If registering as 1 .1, unplug
Slow data transfer and the re-plug the device .
Remove other unused USB devices .
Ensure record switch is in the record
position while connected to computer .
Computer does not Ensure the Micro SD card is inserted
recognize camera properly .
Micro SD card may be corrupted .
Attempt formatting process .
Using Windows, run Check Disk
File won't transfer off In the run command type:
memory card chkdsk volume:/f
then press enter
Sound
Place piece of tape over microphone
hole .
Excessive Wind Noise
Try using the submersible case
Solution
7