Page 1
Avenger 2 0 1 1 O W N E R ’ S M A N U A L...
Page 2
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc.
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 11
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Vehicle Security Alarm — If Equipped ..17 ▫...
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — Power Windows ..... . . 34 If Equipped .
Page 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Automatic Locking Retractor Mode (ALR) — ▫ Advanced Front Airbag Features ..58 If Equipped ......48 ▫...
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has Automatic Transaxle the key code numbers for your vehicle locks. These Place the shift lever in PARK. Turn the ignition switch to numbers can be used to order duplicate keys from your the ACC position, push the key and cylinder inward, authorized dealer.
Page 15
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 • For vehicles equipped with the Electronic Vehicle In- NOTE: • If you try to remove the key before you place the shift formation Center (EVIC), the power window switches, lever in PARK, the key may become trapped tempo- radio, hands–free system (if equipped), and power rarily in the ignition switch lock cylinder.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locking Doors With A Key CAUTION! There is only one external door lock cylinder which is located in the driver’s door. An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors You can insert the key with either side up.
Page 17
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses ignition keys, which have an embedded If the Vehicle Security Light turns on during normal electronic chip (transponder), to prevent unauthorized vehicle operation (vehicle running for longer than 10 sec- vehicle operation.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replacement Keys Customer Key Programming You can program new keys to the system if you have two NOTE: Only keys that have been programmed to the valid Sentry Keys by performing the following proce- vehicle electronics can be used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 4. Insert a blank Sentry Key into the ignition switch. your vehicle. The remaining keys must then be repro- Turn the ignition switch to the ON/RUN position within grammed. All vehicle keys must be taken to an autho- 60 seconds.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If something triggers the alarm, the Vehicle Security 2. Lock the door using either the power door lock switch Alarm will signal for about 18 minutes. For the first three (one door must be open) or the LOCK button on the minutes, the horn will sound intermittently and the Remote Keyless Entry (RKE) transmitter (doors can be headlights, park lamps and/or turn signals will flash and...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • Once armed, the Vehicle Security Alarm disables the The Vehicle Security Alarm is designed to protect your unlock switch on the driver door trim panel and vehicle; however, you can create conditions where the passenger door trim panel, the trunk release button on Vehicle Security Alarm will give you a false alarm.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Illuminated Entry System will not operate if the ILLUMINATED ENTRY — IF EQUIPPED The courtesy lights will turn on when you use the dimmer control is in the extreme downward position. Remote Keyless Entry (RKE) transmitter to unlock the REMOTE KEYLESS ENTRY (RKE) —...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Key Unlock, Driver Door/All Doors First Press This feature lets you program the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: •...
Page 24
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Release both buttons at the same time. Flash Lights With Lock The feature will cause the turn signal lights to flash when 3. Test the feature while outside of the vehicle, by the doors are locked or unlocked with the RKE transmit- pressing the LOCK/UNLOCK buttons on the RKE trans- ter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 3. Test the feature while outside of the vehicle, by (Customer-Programmable Features)” in “Understanding pressing the LOCK/UNLOCK buttons on the RKE trans- Your Instrument Panel” for further information. mitter with the ignition in the LOCK position, and the To Lock The Doors key removed.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following steps: the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Using The Panic Alarm Programming Additional Transmitters To turn the Panic Alarm feature on or off, press and hold Refer to Sentry Key “Customer Key Programming.” the PANIC button on the RKE transmitter for at least one second and release.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With the RKE transmitter buttons facing down, use a 2. Remove and replace the battery. Avoid touching the flat blade screwdriver to pry the two halves of the RKE new battery with your fingers. Skin oils may cause transmitter apart.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal How To Use Remote Start distance, check for these two conditions. All of the following conditions must be met before the engine will remote start: 1.
Page 30
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar WARNING! • Remote Start Aborted — Trunk Ajar • Do not start or run an engine in a closed garage or • Remote Start Aborted — Fuel Low confined area.
Page 31
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For security, power window operation is disabled To Exit Remote Start Mode Without Driving The when the vehicle is in the Remote Start mode. Vehicle Press and release the REMOTE START button one time or •...
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an To lock each door, push the door lock knob on each door accident, lock the vehicle doors as you drive as trim panel downward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A door lock switch is located on the driver and passenger door panel.
Page 34
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock On Exit Auto Unlock On Exit Programming The doors will unlock automatically on vehicles with The Automatic Unlock Doors On Exit feature can be power door locks if: enabled or disabled as follows: •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the WARNING! rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approxi- Avoid trapping anyone in a vehicle in a collision. mately one-quarter turn to the lock or unlock position (as Remember that the rear doors can only be opened indicated by the stamped icons).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To cancel the Auto-Down movement, operate the switch Auto Window Up — If Equipped either in the up or down direction and release the switch. Lift the window switch fully upward to the second detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing. Reset Auto Up Anytime the vehicle battery goes dead, the Auto Up function will be disabled.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- With the ignition switch in the ON/RUN position, the rence and can be minimized. If the buffeting occurs with word “deck” will display in place of the odometer the rear windows open, then open the front and rear display indicating that the trunk is open.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 TRUNK SAFETY WARNING WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front seat belts incorporate pretensioners to enhance OCCUPANT RESTRAINTS Some of the most important safety features in your occupant protection by managing occupant energy vehicle are the restraint systems: during an impact event •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Please pay close attention to the information in this Research has shown that seat belts save lives, and they section. It tells you how to use your restraint system can reduce the seriousness of injuries in an accident. properly, to keep you and your passengers as safe as Some of the worst injuries happen when people are possible.
Page 44
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Wearing your belt in the wrong place could make • Be sure everyone in your vehicle is in a seat and your injuries in an accident much worse. You using a seat belt properly.
Page 45
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.
Page 47
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 48
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rear Seat Belts How To Engage The Automatic Locking Mode The shoulder belt anchorages of the rear three-point belts 1. Buckle the combination lap and shoulder belt. are nonadjustable for outboard and center rear passen- gers on sedans.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Seat Belt Pretensioners WARNING! The seat belts for both front seating positions are • The belt and retractor assembly must be replaced equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of an if the seat belt assembly Automatic Locking Re- accident.
Page 52
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE identified by any markings, only through visual inspec- However if during a front impact, a secondary rear tion of the head restraint. The head restraint will be split impact occurs, the AHR may deploy based on the sever- in two halves, with the front half being soft foam and ity and type of the impact.
Page 53
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 54
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 1 — Downward Movement 2 — Rearward Movement...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 4. The AHR front soft foam and trim half should lock NOTE: • If you have difficulties or problems resetting the into the back decorative plastic half. Active Head Restraints, see an authorized dealer. •...
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE other occupants to fasten their seatbelts. If the driver 1. Turn the ignition switch to the LOCK position and seatbelt is unbuckled while traveling at speeds greater buckle the driver’s seat belt. than 5 mph (8 km/h), BeltAlert will chime as a single 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 BeltAlert can be reactivated by repeating this procedure. dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not NOTE: Although BeltAlert has been deactivated, the long enough.
Page 58
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE instrument panel, above the glove compartment. The The Advanced Front Airbags have a multistage inflator words SRS AIRBAG are embossed on the airbag covers. design. This allows the airbag to have different rates of inflation that are based on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 • Airbag Warning Light vehicle is equipped with SABIC, they are located above the side windows. The trim covering the side airbags is • Steering Wheel and Column labeled SRS AIRBAG. • Instrument Panel This vehicle is equipped with Supplemental Seat- •...
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Airbag Features WARNING! The Advanced Front Airbag system has multistage driver • No objects should be placed over or near the and front passenger airbags. This system provides output appropriate to the severity and type of collision as airbag on the instrument panel, because any such determined by the Occupant Restraint Controller (ORC), objects could cause harm if the vehicle is in a...
Page 61
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Supplemental Seat-Mounted Side Airbags (SAB) When the airbag deploys, it opens the seam between the Supplemental Seat-Mounted Side Airbags provide en- front and side of the seat’s trim cover. Each airbag hanced protection to help protect an occupant during a deploys independently, that is a left side impact deploys side impact.
Page 62
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain (SABIC) SABIC airbags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side- impact head injuries.
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 The system includes side impact sensors adjacent to both Knee Impact Bolsters front and rear seat occupants that are calibrated to deploy The Knee Impact Bolsters help protect the knees of the the SABIC airbags during impacts that require airbag driver and the front passenger, and position front occu- occupant protection.
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. All occupants should always wear their lap and WARNING! shoulder belts properly. Infants in rear facing child restraints should never 3. The driver and front passenger seats should be ride in the front seat of a vehicle with a passenger moved back as far as practical to allow the Advanced Advanced Front Airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 WARNING! WARNING! (Continued) • If your vehicle is equipped with SABIC airbags, • Relying on the airbags alone could lead to more do not have any accessory items installed which severe injuries in a collision. The airbags work will alter the roof, including adding a sunroof to with your seat belt to restrain you properly.
Page 66
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ORC deploys the Advanced Front Airbags, SABIC air- The side airbags will not deploy in all side collisions. Side bags, Supplemental Seat-Mounted Side Airbags, and airbag deployment will depend on the severity and type front seat belt pretensioners, as required, depending on of collision.
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The ORC contains a backup power supply system that WARNING! may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Ignoring the Airbag Warning Light in your instru- ment panel could mean you won’t have the airbags to Also, the ORC turns on the Airbag Warning protect you in a collision.
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE based on the collision type and severity. The steering Based on the severity and type of collision, the side wheel hub trim cover and the upper right side of the airbag inflator on the crash side of the vehicle may be instrument panel separate and fold out of the way as the triggered, releasing a quantity of non-toxic gas.
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 A quantity of non-toxic gas is generated to inflate the side Enhanced Accident Response System curtain airbag. The inflating side curtain airbag pushes In the event of an impact causing airbag deployment, if the outside edge of the headliner out of the way and the communication network remains intact, and the covers the window.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Front and/or side airbags will not deploy in all airbag inflation. These airborne particles may irritate collisions. This does not mean something is wrong with the skin, eyes, nose, or throat. If you have skin or eye the airbag system.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Maintaining Your Airbag System WARNING! (Continued) • Do not attempt to modify any part of your ad- WARNING! vanced airbag system. The airbag may inflate • Modifications to any part of the airbag system accidentally or may not function properly if modi- could cause it to fail when you need it.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light NOTE: If the speedometer, tachometer, or any engine You will want to have the airbags ready to related gauges are not working, the Occupant Restraint inflate for your protection in a collision. The Controller (ORC) may also be disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is were buckled/fastened; required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties •...
Page 74
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Small Children WARNING! • Safety experts recommend that children ride In a collision, an unrestrained child, even a tiny baby, rearward-facing in the vehicle until they are at least can become a projectile inside the vehicle. The force one year old and weigh at least 20 lbs (9 kg).
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 the vehicle’s seat belts properly. If the child cannot sit WARNING! with knees bent over the vehicle’s cushion while the child’s back is against the seatback, then the child should Rearward-facing child seats must never be used in use a belt-positioning booster seat.
Page 76
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All passenger seating positions contain automatic Here are some tips on getting the most out of your child restraints: locking retractors. However, any seat belt system will loosen with time, so check the belt occasionally and •...
Page 77
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Buckle the child into the seat according to the child Anchors and Tether for CHildren. The LATCH system restraint manufacturer’s directions. provides for the installation of the child restraint without using the vehicle seat belt. All three rear seating positions WARNING! have lower anchorages that are capable of accommodat- ing LATCH-compatible child seats having flexible,...
Page 78
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rear Seat LATCH Anchors Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage, have been available for some time.
Page 79
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 have tether straps, and you are urged to take advantage Installing The LATCH-Compatible Child Restraint of all of the available attachments provided with your System child restraint in any vehicle. We urge you to carefully follow the directions of the manufacturer when installing your child restraint.
Page 80
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE window. These tether strap anchorages are under a provide the most direct path between the anchor and the plastic cover with this symbol on it. child restraint. Finally, tighten all three straps as you push the child restraint rearward and downward into the Many, but not all restraint systems will be equipped with seat, removing slack in the straps according to the child...
Page 81
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE between the two posts. If not possible, lower the head Installing Child Restraints Using The Vehicle Seat restraint and pass the tether strap around the outboard Belt side of the head restraint. The passenger seat belts are equipped with Automatic Locking Retractors (ALRs), which are designed to keep 3.
Page 83
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 In the rear seat, you may have trouble tightening the Children Too Large for Booster Seats lap/shoulder belt on the child restraint because the Children who are large enough to wear the shoulder belt buckle or latch plate is too close to the belt path opening comfortably, and whose legs are long enough to bend on the restraint.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transporting Pets While cruising, brief full-throttle acceleration within the Airbags deploying in the front seat could harm your pet. limits of local traffic laws, contributes to a good break-in. An unrestrained pet will be thrown about and possibly Wide-open throttle acceleration in low gear can be detri- injured, or injure a passenger during panic braking or in mental and should be avoided.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 SAFETY TIPS Exhaust Gas Transporting Passengers WARNING! NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. WARNING! Breathing it can make you unconscious and can •...
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode.
Page 87
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place • Always make sure that floor mats are properly the blower control on high speed. You should be able to attached to the floor mat fasteners.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lodged in the tread. Inspect the tread and sidewall for WARNING! (Continued) cuts and cracks. Check the wheel nuts for tightness. • Always make sure that objects cannot fall into the Check the tires (including spare) for proper pressure. driver foot well while the vehicle is moving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......91 Voice Command — If Equipped ... . 95 ▫...
Page 90
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Fold-Flat Front Passenger Seat ... 103 ▫ Flash-To-Pass ..... . . 113 ▫...
Page 91
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 ▫ Security ......130 Electronic Speed Control — If Equipped ..122 ▫...
Page 92
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Ignition Off Operation ....134 ▫ Driver’s Side Sunglass Holder — If Equipped ......140 Electrical Power Outlets .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped CAUTION! This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or To avoid damage to the mirror during cleaning, never off by pressing the button at the base of the mirror.
Page 95
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Power Mirror Control Mirror Directions To adjust a mirror, turn the control wand toward the left When you are finished adjusting the mirror, turn the or right mirror positions indicated. Tilt the control wand control to the center position to prevent accidentally in the direction you want the mirror to move.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Side View Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Illuminated Vanity Mirrors — If Equipped Uconnect™ Phone — IF EQUIPPED An illuminated vanity mirror is on each sun visor. To use Uconnect™ Phone is a hands-free system that allows you the mirror, rotate the sun visor down and swing the to use voice commands to dial a phone number stored in mirror cover upward.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
Page 99
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Adjusting The Seat Forward Or Rearward Reclining The Seatback The seat can be adjusted both forward and rearward. The angle of the seatback can be adjusted forward or Push the seat switch forward or rearward, the seat will backward.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped WARNING! (Continued) There are two heated seat switches that allow the driver • Do not ride with the seatback reclined so that the and passenger to operate the seats independently. The shoulder belt is no longer resting against your controls for each heater are located near the bottom chest.
Page 101
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 When the HIGH-level setting is selected, the heater will WARNING! (Continued) provide a boosted heat level during the first four minutes • Do not place anything on the seat that insulates of operation. Then, the heat output will drop to the against heat, such as a blanket or cushion.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front Seat Adjustments WARNING! The adjusting bar is located at the front of the seats, near the floor. Pull the bar upward to move the seat to the Adjusting a seat while the vehicle is moving is desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Reclining Seats The recliner control is on the side of the seat. To recline, lean forward slightly before lifting the lever, then lean back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support — If Equipped WARNING! This feature allows you to increase or decrease the • Adjusting a seat while the vehicle is moving is amount of lumbar support. The control lever is located on the outboard side of the driver’s seatback.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Fold-Flat Front Passenger Seat The hard seatback features a work surface and a molded The recline handle on the front passenger seat also rim for retaining items stored on the seatback panel. releases the seatback to fold forward. Fold-Flat Front Passenger Seat Seatback Adjustment...
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Active Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury Active Head Restraints are passive, deployable compo- by restricting head movement in the event of a rear nents, and vehicles with this equipment cannot be readily impact.
Page 107
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint. To lower the head restraint, press the push forward and rearward. To tilt the head restraint closer to button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the downward on the head restraint.
Page 108
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)”...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Folding Rear Seat WARNING! (Continued) To provide additional storage area, the rear seatback can • Active Head Restraints may be deployed if they be folded forward. Pull on the loops shown in the picture are struck by an object such as a hand, foot or loose to fold down either or both seatbacks.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision. Children should be seated and using the proper restraint system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 TO OPEN AND CLOSE THE HOOD 2. Lift the secondary latch located under the front edge To open the hood, two latches must be released. of the hood, near the center and raise the hood. 1.
Page 112
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open CAUTION! position. Place the upper end of the prop rod in the hole on the left underside of the hood. To prevent possible damage, do not slam the hood to close it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 LIGHTS Headlights and Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever for parking light operation. Turn to the second detent for The multifunction lever controls the operation of the headlight operation.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped Headlight Time Delay Turning the end of the multifunction lever to the third There is also a feature that delays turning off the vehicle detent (AUTO), will activate the automatic headlight lights for 30, 60 or 90 seconds after the ignition switch is system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped NOTE: The front fog lights will only operate with the The front fog light switch is on the multifunction headlights on low beam. Selecting high beam headlights lever. To activate the front fog lights, turn on the will turn off the front fog lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE will remain on until the switch is pressed a second time, There is a second light located midway back in the so be sure they have been turned off before leaving the headliner. vehicle.
Page 119
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Windshield Wiper/Washer Lever Changing Wiper Speeds Rotate the end of the lever to the LO position for NOTE: The wipers will automatically return to the park low-speed wiper operation, or to the HI position for position if you turn the ignition switch OFF while they high-speed wiper operation.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE regulate the wipe interval from a minimum of one cycle CAUTION! every second to a maximum of approximately 18 seconds • Turn the windshield wipers off when driving between cycles. through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Windshield Washers WARNING! To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as Sudden loss of visibility through the windshield washer spray is desired. could lead to a collision.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Headlights With Wipers Feature Push down on the wiper control lever to activate a single (Available With Automatic Headlights Only) wipe to clear the windshield of road mist or spray from When this feature is active, the headlights will turn on a passing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 TILT/TELESCOPING STEERING COLUMN To unlock the steering column, pull the control handle This feature allows you to tilt the steering column outward. To tilt the steering column, move the steering upward or downward. It also allows you to lengthen or wheel upward or downward as desired.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED NOTE: In order to ensure proper operation, the Elec- When engaged, the Electronic Speed Control takes over tronic Speed Control System has been designed to shut accelerator operations at speeds greater than 25 mph down if multiple Speed Control functions are operated at (40 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the Leaving the Electronic Speed Control system on vehicle will deactivate Electronic Speed Control without when not in use is dangerous.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the RES (+) button once will result in a 1 mph NOTE: The Electronic Speed Control system maintains (2 km/h) increase in set speed. Each subsequent tap of speed up and down hills. A slight speed change on the button results in an increase of 1 mph (2 km/h).
Page 127
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 door openers, motorized gates, lighting or home security NOTE: HomeLink is disabled when the Vehicle Secu- systems. The HomeLink unit operates off your vehicle’s rity Alarm is active. battery. WARNING! The HomeLink buttons that are located in the headliner •...
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle should be parked outside of the garage WARNING! (Continued) when programming. • Vehicle exhaust contains carbon monoxide, a dan- • Turn the ignition switch to the ON/RUN position. gerous gas. Do not run your vehicle in the garage while training the transceiver.
Page 129
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 • Press and hold the just-trained HomeLink button and Watch for the HomeLink indicator to change flash rates. When it changes, it is programmed. It may take observe the indicator light. up to 30 seconds or longer in rare cases. The garage If the indicator light stays on constantly, programming door may open and close while you train.
Page 130
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This can usually be found where the hanging antenna 1. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor. It is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Gate Operator/Canadian Programming 3. Continue to press and hold the HomeLink button, Canadian radio frequency laws require transmitter sig- while you press and release (“cycle”), your handheld nals to time-out (or quit) after several seconds of trans- transmitter every two seconds until HomeLink has mission –...
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The sunroof controls are mounted between the dome/ Canada RSS-210. Operation is subject to the following reading lights.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave children in a vehicle with the key in second and the sunroof will open automatically from any position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Closing Sunroof — Express sunroof will automatically retract. Remove the obstruc- Press the switch forward and release it within one-half tion if this occurs. Next, press the switch forward and second and the sunroof will close automatically from any release to Express Close.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of For vehicles not equipped with the Electronic Vehicle pressure on the ears or a helicopter-type sound in the Information Center (EVIC), the power sunroof switch ears.
Page 137
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 The instrument panel power outlet, located below the A second power outlet is located inside the center con- climate control knobs, has power available only when the sole. ignition is ON. This power outlet will also operate a conventional cigar lighter unit.
Page 138
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • To ensure proper operation a MOPAR knob and element must be used. • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced.
Page 139
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your autho- rized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 STORAGE Pull on the handle to open the glovebox. Glovebox The glovebox storage compartment is located on the right side of the instrument panel. Opened Glovebox Glovebox Storage Compartment...
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Side Sunglass Holder — If Equipped Cargo Area An integrated sunglass holder is located in the headliner The 60/40 split-folding rear seat provides cargo-carrying above the sun visor. To access the sunglass holder, lower versatility.
Page 143
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Always place cargo evenly on the cargo floor. Put heavier WARNING! (Continued) objects as low and as far forward as possible. • The cargo area in the rear of the vehicle (with the Place as much cargo as possible in front of the rear axle.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES The center console is located between the front driver and passenger seats. The center console armrest slides forward from design position to provide added user comfort. The center console can be used for storage and is also equipped with an electrical power outlet.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Dual Storage Bins The lower bin can be accessed directly, without first The center console contains both an upper and lower exposing the upper bin, by operating the right latch with storage bin. Lifting a latch at the front of the hinged the armrest down.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to The rear window defroster button is located on the the heating elements: climate control (Mode) knob. Press this button to •...
Page 147
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....148 Electronic Vehicle Information Center (EVIC) – If Equipped ......168 Instrument Cluster .
Page 148
146 UNDERSTANDING YOUR INSTRUMENT PANEL Media Center 230 (REQ) — AM/FM Stereo Media Center 730N/430/430N (RHR/RER/ Radio And 6–Disc CD/DVD Changer RBZ/RHB) CD/DVD/HDD/NAV — (MP3/WMA AUX Jack) ....178 If Equipped .
Page 149
UNDERSTANDING YOUR INSTRUMENT PANEL 147 ▫ Left-Hand Switch Functions For Radio Media Center 130 With Satellite Radio (Sales Code RES+RSC)....207 Operation ......225 ▫...
150 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture.
Page 153
UNDERSTANDING YOUR INSTRUMENT PANEL 151 5. Low Fuel Light If jump starting is required, refer to “Jump Starting When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7.
Page 154
152 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condi- Vehicle” for further information. tion. If the engine is critically hot, a warning chime will sound 10 times.
Page 155
UNDERSTANDING YOUR INSTRUMENT PANEL 153 The light will remain on until the cause is corrected. Vehicles equipped with Anti-Lock brakes (ABS), are also equipped with Electronic Brake Force Distribution (EBD). NOTE: The light may flash momentarily during sharp In the event of an EBD failure, the Brake Warning Light cornering maneuvers which change fluid level condi- will turn on along with the ABS Light.
Page 156
154 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Tachometer been driven. If your odometer needs to be repaired or The silver area of the scale shows the permissible engine serviced, the repair technician should leave the odometer revolutions-per-minute (RPM x 1000) for each gear range. reading the same as it was before the repair or service.
Page 157
UNDERSTANDING YOUR INSTRUMENT PANEL 155 Vehicle Odometer Messages LoW TirE When the appropriate conditions exist, the odometer will When the appropriate condition exists, the odometer display the following messages: display will toggle between LoW and TirE for three cycles. door ......Door Ajar HOTOIL deck .
Page 158
156 UNDERSTANDING YOUR INSTRUMENT PANEL tighten the fuel filler cap properly and press the odom- To turn off the message temporarily, press and release the eter reset button to turn off the “gASCAP” message. Trip Odometer button on the instrument cluster. To reset (Refer to “Onboard Diagnostic System —...
Page 159
UNDERSTANDING YOUR INSTRUMENT PANEL 157 15. Cruise Indicator — If Equipped Dual Trip Odometer — If Equipped This indicator shows that the Electronic Speed Press and release this button to change the display from Control System is ON. odometer to “Trip A.” Press and release it a second time to change the display to “Trip B.”...
Page 160
158 UNDERSTANDING YOUR INSTRUMENT PANEL If the light is flashing when the engine is running you 19. Electronic Stability Control (ESC) OFF Indicator may experience power loss, an elevated/rough idle, and Light — If Equipped increased brake pedal effort, and your vehicle may This light indicates the Electronic Stability Con- require towing.
Page 161
UNDERSTANDING YOUR INSTRUMENT PANEL 159 • Each time the ignition is turned to ON/RUN, the ESC 22. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light — If Equipped system will be ON even if it was turned off previously. The “ESC Activation/Malfunction Indicator •...
Page 162
160 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been Your vehicle has also been equipped with a TPMS equipped with a Tire Pressure Monitoring System malfunction indicator to indicate when the system is not (TPMS) that illuminates a low tire pressure telltale when operating properly.
Page 163
UNDERSTANDING YOUR INSTRUMENT PANEL 161 the bulb does not come on when turning the key from CAUTION! LOCK to ON/RUN, have the condition checked promptly. The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and Certain conditions such as a loose or missing gas cap, warning have been established for the tire size poor fuel quality, etc., may illuminate the light after...
Page 164
162 UNDERSTANDING YOUR INSTRUMENT PANEL the conventional brake system will continue to operate WARNING! normally provided that the BRAKE warning light is not A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal If the ABS light is on, the brake system should be serviced operating conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL 163 vehicle. Then, shift the transmission into NEUTRAL and 28. High Beam Indicator run the engine at idle or faster until the light turns off. This light indicates that the headlights are on high beam. Pull the turn signal lever toward the steer- CAUTION! ing wheel to switch the headlights to low beam.
164 UNDERSTANDING YOUR INSTRUMENT PANEL • If the vehicle is equipped with a Chrysler Control Buttons (Navigation Radio), the NAV system will provide the compass direction, and the variance and calibration menus will be unavailable. The compass will perform accurately, based on GPS signals instead of the Earth’s magnetic field.
UNDERSTANDING YOUR INSTRUMENT PANEL 165 RESET Button Trip B To reset the display shown, turn the ignition switch to the Shows the total distance traveled for Trip B since the last ON position, then press and hold the RESET button. reset.
Page 168
166 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. • Magnetic materials should be kept away from the top of the center of the instrument panel.
Page 169
UNDERSTANDING YOUR INSTRUMENT PANEL 167 To Set The Variance 1. Start the engine and leave the transmission in the Start the engine and leave the transmission gear selector PARK position. lever in the PARK position. Press and hold the RESET 2.
168 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) – IF EQUIPPED • System status The Electronic Vehicle Information Center (EVIC) fea- • Vehicle information warning message displays tures a driver-interactive display that is located in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 169 The system allows the driver to select information by Press and release the COMPASS button to pressing the following buttons on the instrument panel display the compass heading and the out- switch bank located below the climate controls: side temperature.
Page 172
170 UNDERSTANDING YOUR INSTRUMENT PANEL • Left Rear Turn Signal Light Out (with a single chime) • Remote start aborted — Door ajar • Right Front Turn Signal Light Out (with a single • Remote start aborted — Hood ajar chime) •...
UNDERSTANDING YOUR INSTRUMENT PANEL 171 Oil Change Required — If Equipped 2. Fully depress the accelerator pedal slowly three times Your vehicle is equipped with an engine oil change within 10 seconds. indicator system. The Oil Change Required message will 3.
Page 174
172 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) Press and release the DOWN button to advance the display through the Trip Functions. Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is The Trip Functions mode displays the following informa- determined by a weighted average of the instantaneous tion:...
UNDERSTANDING YOUR INSTRUMENT PANEL 173 • Elapsed Time Compass Display Shows the total elapsed time of travel since the last reset. The compass heading indicates the direction Elapsed time will increment when the ignition switch is the vehicle is facing. Press and release the in the ON or START position.
Page 176
174 UNDERSTANDING YOUR INSTRUMENT PANEL one or more 360–degree turns (in an area free from large 3. Press and release the DOWN button until “Calibrate metal or metallic objects) until the CAL indicator in the Compass Yes” displays in the EVIC. EVIC turns off.
Page 177
UNDERSTANDING YOUR INSTRUMENT PANEL 175 NOTE: Magnetic and battery powered devices, (such as 1. Turn the ignition switch to the ON position. Leave the cell phones, iPod’s, radar detectors, PDA’s and laptops) shift lever in PARK. should be kept away from the top of the instrument 2.
176 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer-Programmable Auto Unlock on Exit Features) When ON is selected and the transaxle is in the PARK or Personal settings allows the driver to set and recall NEUTRAL position, all doors will unlock when the features when the automatic transaxle is in PARK.
Page 179
UNDERSTANDING YOUR INSTRUMENT PANEL 177 Sound Horn with Lock Headlights With Wipers When ON is selected, a short horn sound will occur when (Available with Auto Headlights Only) the RKE transmitter LOCK button is pressed. This feature When ON is selected, and the headlight switch is in the may be selected with or without the Flash Lights with AUTO position, the headlights will turn on approxi- Lock feature.
178 UNDERSTANDING YOUR INSTRUMENT PANEL Opening either front vehicle door will cancel this feature. Display Units In To make your selection, press the SELECT button until The EVIC and odometer can be changed between English Off, 45 sec., 5 min., or 10 min. appears. and Metric units of measure.
UNDERSTANDING YOUR INSTRUMENT PANEL 179 Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
Page 182
180 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Phone Button Uconnect™ Phone — If Equipped Pressing the SCAN button causes the tuner to search for Press this button to operate the Uconnect™ Phone feature the next listenable station in AM, FM or Satellite (if (if equipped).
Page 183
UNDERSTANDING YOUR INSTRUMENT PANEL 181 3. After adjusting the hours, press the right side TUNE/ RW/FF SCROLL control knob to set the minutes. The minutes Pressing the RW (Rewind) or FF (Fast Forward) buttons will begin to blink. causes the tuner to search for the next frequency in the direction of the arrows.
Page 184
182 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third or turning the TUNE/SCROLL control knob within five time and TREBLE will display. Turn the TUNE/SCROLL seconds will allow the program format type to be se- control knob to the right or left to increase or decrease the lected.
Page 185
UNDERSTANDING YOUR INSTRUMENT PANEL 183 By pressing the SEEK button when the Music Type icon Program Type 16-Digit Character Display is displayed, the radio will be tuned to the next frequency News News station with the same selected Music Type name. The Nostalgia Nostalga Music Type function only operates when in the FM...
Page 186
184 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, • Angle – Repeatedly pressing SELECT will change selecting DVD Enter will allow you to play the current the viewing angle if supported by the DVD disc (if highlighted selection.
Page 187
UNDERSTANDING YOUR INSTRUMENT PANEL 185 • Set Home Clock - Pressing the SELECT button allows Audio Language — If Equipped you to set the clock. Turn the TUNE/SCROLL control Selecting this item allows you to choose a default audio knob to adjust the hours and then press and turn the language (effective only if the language is supported by TUNE/SCROLL control knob to adjust the minutes.
Page 188
186 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped NOTE: The user will have to set these defaults before Selecting this item allows you to limit maximum audio loading a disc. If changes are made to these settings after dynamic range.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 You may add a second station to each pushbutton by Operation Instructions - (DISC MODE for CD and repeating the above procedure with this exception: Press MP3/WMA Audio Play, DVD-VIDEO) the SET button twice and SET 2 will show in the display The radio DVD player and many DVD discs are coded by window.
Page 190
188 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton with the corresponding number (1-6) where the LOAD Button —...
UNDERSTANDING YOUR INSTRUMENT PANEL 189 SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 192
190 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ • Maximum number of directory levels: 8 WMA tracks on that disc.
Page 193
UNDERSTANDING YOUR INSTRUMENT PANEL 191 Playback of MP3/WMA Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, 192, MPEG-1 Audio contains a lot of folders or files, the radio will take more 48, 44.1, 32...
192 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
Page 195
UNDERSTANDING YOUR INSTRUMENT PANEL 193 SCAN Button (Auxiliary Mode) Operating Instructions — Voice Command System No function. (If Equipped) For the radio, Refer to “Voice Command” in the EJECT Button (Auxiliary Mode) Uconnect™ User Manual located on the DVD for further No function.
194 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision sports, news, entertainment, and programming for chil- This product incorporates copyright protection technol- dren, directly from its satellites and broadcasting studios. ogy that is protected by U.S. patents and other intellec- NOTE: Sirius service is not available in Hawaii and has tual property rights.
Page 197
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Electronic Serial Number/Sirius Identification Selecting Uconnect™ Multimedia (Satellite) Mode Number (ESN/SID) Press the SAT button until SAT appears in the display. A Please have the following information available when CD may remain in the radio while in the Satellite radio calling: mode.
Page 198
196 UNDERSTANDING YOUR INSTRUMENT PANEL • Dense tree coverage may interrupt reception in the SCAN Button form of short audio mutes. Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- •...
Page 199
UNDERSTANDING YOUR INSTRUMENT PANEL 197 TUNE Control (Rotary) SETUP Button Turn the rotary TUNE/SCROLL control knob clockwise Pressing the SETUP button allows you to select the to increase or counterclockwise to decrease the channel. following items: • Display Sirius ID number — Press the AUDIO/ MUSIC TYPE Button Pressing this button once will turn on the Music Type SELECT button to display the Sirius ID number.
198 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second channel to each pushbutton by MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ repeating the above procedure with this exception: Press RHB) CD/DVD/HDD/NAV — IF EQUIPPED the SET button twice and SET 2 will show in the display NOTE: The sales code is located on the lower right side window.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio.
Page 202
200 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons 4. Adjust the minutes using the right side TUNE/ Press and release the SEEK buttons to search for the next SCROLL control knob. Press the TUNE/SCROLL control listenable station in AM/FM mode. Press the right switch knob to save time change.
Page 203
UNDERSTANDING YOUR INSTRUMENT PANEL 201 Push the rotary TUNE/SCROLL control knob a second AM/FM Button time and MID will display. Turn the TUNE/SCROLL Press the buttons to select either AM or FM mode. control knob to the right or left to increase or decrease the SET/RND Button —...
202 UNDERSTANDING YOUR INSTRUMENT PANEL • This radio is capable of playing compact discs (CD), and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice.
Page 205
UNDERSTANDING YOUR INSTRUMENT PANEL 203 If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, • This CD player will accept 4-3/4 in (12 cm) discs the radio will reinsert the CD but will not play it.
204 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Notes on Playing MP3 Files Press and hold the FF (Fast Forward) button and the CD The radio can play MP3 files; however, acceptable MP3 player will begin to fast forward until FF is released, or file recording media and formats are limited.
Page 207
UNDERSTANDING YOUR INSTRUMENT PANEL 205 • Maximum number of files: 255 Discs created with an option such as keep disc open after writing are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited.
Page 208
206 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification quency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, 192, contains a lot of folders or files, the radio will take more MPEG-1 Audio 160, 128, 112, 96,...
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Operation Instructions - Auxiliary Mode MEDIA CENTER 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which (SALES CODE RES+RSC) allows the user to plug in a portable device, such as an NOTE: The radio sales code is located on the lower right MP3 player, or cassette player, and utilize the vehicle’s side of the radio faceplate.
208 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 211
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
Page 212
210 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 213
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Push the rotary TUNE/SCROLL control knob again to Program Type 16-Digit Character Display exit setting tone, balance, and fade. College College MUSIC TYPE Button Country Country Pressing this button once will turn on the Music Type Foreign Language Language mode for five seconds.
Page 214
212 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Program Type 16-Digit Character Display Pressing the SETUP button allows you to select between Soft Rhythm and Blues Soft R&B the following items: Sports Sports • Set Clock — Pressing the SELECT button will allow Talk Talk you to set the clock.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 window. Select the button (1–6) you wish to lock onto this Buttons 1 - 6 station and press and release that button. If a button is These buttons tune the radio to the stations that you not selected within five seconds after pressing the SET/ commit to pushbutton memory (12 AM and 12 FM RND button, the station will continue to play but will not...
Page 216
214 UNDERSTANDING YOUR INSTRUMENT PANEL Inserting Compact Disc(s) CAUTION! (Continued) Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel label facing up. The CD will automatically be pulled into away and jam the player mechanism.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button convertible or soft-top models (if equipped). Press the button to select either AM or FM mode. SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD.
Page 218
216 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems)
Page 219
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 320, 256, 224, 192, extension may cause playback problems.
218 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 Press and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Press this button to change the display to time of day. The time of day will display for five seconds (when the Operation Instructions - Auxiliary Mode ignition is OFF).
Page 222
220 UNDERSTANDING YOUR INSTRUMENT PANEL radio system in your vehicle. Sirius will supply a wel- using the TUNE/SCROLL control knob until Sirius ID is come kit that contains general information, including selected. Press the TUNE/SCROLL control knob and the how to setup your on-line listening account. For further Sirius ID number will display.
Page 223
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 224
222 UNDERSTANDING YOUR INSTRUMENT PANEL additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 225
UNDERSTANDING YOUR INSTRUMENT PANEL 223 SET Button – To Set the Pushbutton Memory pushbutton memory. The channels stored in SET 2 When you are receiving a channel that you wish to memory can be selected by pressing the pushbutton commit to pushbutton memory, press the SET button. twice.
224 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left and right controls are rocker-type switches with a pushbutton in the center of each switch.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Right-Hand Switch Functions Left-Hand Switch Functions for Media (i.e., CD) Operation • Press the top of the switch to increase the volume. • Press the top of the switch once to listen to the next •...
226 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Manual Heating and Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 230
228 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Mode Control (Air Direction) Rotate this control to regulate the tem- Rotate this control to choose from sev- perature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the con-...
Page 231
UNDERSTANDING YOUR INSTRUMENT PANEL 229 Bi-Level Defrost Air is directed through the panel and floor outlets. Air is directed through the windshield and side window demist outlets. Use this mode with maxi- mum blower and temperature settings for best wind- NOTE: For all settings except full cold or full hot, there shield and side window defrosting.
Page 232
230 UNDERSTANDING YOUR INSTRUMENT PANEL • When the ignition switch is turned to the LOCK NOTE: • Continuous use of the recirculation mode may make position, the recirculation feature will be cancelled. the inside air stuffy and window fogging may occur. Air Conditioning Control Extended use of this mode is not recommended.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Automatic Temperature Control (ATC) — Automatic Operation If Equipped The Automatic Temperature Control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple.
Page 234
232 UNDERSTANDING YOUR INSTRUMENT PANEL • If your air conditioning performance seems lower than You will experience the greatest efficiency by simply allowing the system to function automatically. Selecting expected, check the front of the A/C condenser located the “O” (OFF) position on the blower control stops the in front of the radiator for an accumulation of dirt or system completely and closes the outside air intake.
Page 235
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Blower Control Mode Preferred Automatic, or Blower and Mode Pre- For full automatic operation or for ferred Automatic. This means the operator can override automatic blower operation turn the the blower, the mode, or both. There is a manual blower knob to AUTO position.
Page 236
234 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 237
UNDERSTANDING YOUR INSTRUMENT PANEL 235 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 238
236 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
UNDERSTANDING YOUR INSTRUMENT PANEL 237 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 240
238 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The Mix windshield, is free of obstructions such as leaves.
Page 241
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Control Setting Suggestions for Various Weather Conditions...
246 STARTING AND OPERATING STARTING PROCEDURES Automatic Transmission Before starting your vehicle, adjust your seat, adjust the The shift lever must be in the PARK or NEUTRAL inside and outside mirrors, fasten your seat belt, and if position before you can start the engine. Apply the brakes present, instruct all other occupants to buckle their seat before shifting to any driving gear.
STARTING AND OPERATING 247 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto- •...
Page 250
248 STARTING AND OPERATING Without Tip Start If the engine shows no sign of starting after two 15- If the engine fails to start after you have followed the second periods of cranking with the accelerator pedal “Normal Starting” or “Extreme Cold Weather” proce- held to the floor, repeat the “Normal Starting”...
STARTING AND OPERATING 249 The engine block heater cord is bundled under the hood CAUTION! between the headlight assembly and the Totally Inte- grated Power Module (Fuse Box) on the driver’s side of To prevent damage to the starter, wait 10 to 15 sec- the vehicle.
250 STARTING AND OPERATING AUTOMATIC TRANSMISSION NOTE: You MUST press and hold the brake pedal down while shifting out of PARK. CAUTION! WARNING! Damage to the transmission may occur if the follow- • It is dangerous to move the shift lever out of PARK ing precautions are not observed: •...
STARTING AND OPERATING 251 Automatic Transmission Ignition Interlock WARNING! (Continued) Systems • Unintended movement of a vehicle could injure These systems prevent the key fob from being removed those in and near the vehicle. As with all vehicles, unless the shift lever is in PARK. They also prevent you should never exit a vehicle while the engine is shifting out of PARK unless the ignition switch is out of running.
252 STARTING AND OPERATING Brake/Transmission Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK position. To move the shift lever out of the PARK position, the ignition switch must be turned to any other switch position (ACC, ON, or START) (engine running or not) and the brake pedal must be pressed.
Page 255
STARTING AND OPERATING 253 When parking on a flat surface, place the shift lever in the WARNING! (Continued) PARK position first, and then apply the parking brake. • Never leave children alone in a vehicle. Leaving When parking on a hill, it is important to set the parking unattended children in a vehicle is dangerous for a brake before placing the shift lever in PARK, otherwise number of reasons.
Page 256
254 STARTING AND OPERATING NEUTRAL example: When operating the vehicle under heavy load- This range is used when vehicle is standing for pro- ing conditions, (i.e. in hilly terrain, traveling into strong longed periods with engine running. Engine may be headwinds, or while towing heavy trailers).
Page 257
STARTING AND OPERATING 255 DRIVE 3— Four-Speed Transmission CAUTION! This range eliminates shifts into fourth gear. The trans- mission will operate normally in first and second gear. If the transmission operating temperature exceeds Shifts into third may be delayed to provide second gear acceptable limits, the vehicle computer may override operation at higher speeds.
256 STARTING AND OPERATING In the event that the problem has been momentary, the AUTOSTICK — IF EQUIPPED transmission can be reset to regain all forward gears. AutoStick is a driver-interactive feature providing manual shift control, giving you more control of the 1.
STARTING AND OPERATING 257 • Avoid using speed control when AutoStick is en- NOTE: In AutoStick mode, the transmission will only shift up or down when the driver moves the shift lever to gaged. the right (+) or left (-). •...
258 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
STARTING AND OPERATING 259 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 262
260 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
STARTING AND OPERATING 261 • Upon initial start-up in cold weather, the power steer- POWER STEERING The standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces.
262 STARTING AND OPERATING Power Steering Fluid Check WARNING! Checking the power steering fluid level at a defined service interval is not required. The fluid should only be Fluid level should be checked on a level surface and checked if a leak is suspected, abnormal noises are with the engine off to prevent injury from moving apparent, and/or the system is not functioning as antici- parts and to ensure accurate fluid level reading.
Page 265
STARTING AND OPERATING 263 The parking brake lever is located in the center console. When the parking brake is applied with the ignition To apply the parking brake, pull the lever up as firmly as switch ON, the “Brake Warning Light” in the instrument possible.
Page 266
264 STARTING AND OPERATING make it difficult to move the shift lever out of PARK. The WARNING! (Continued) parking brake should always be applied whenever the • Be sure the parking brake is fully disengaged driver is not in the vehicle. before driving;...
STARTING AND OPERATING 265 ANTI-LOCK BRAKE SYSTEM (ABS) WARNING! (Continued) The Anti-Lock Brake System (ABS) provides increased • The ABS cannot prevent collisions, including vehicle stability and brake performance under most those resulting from excessive speed in turns, braking conditions. The system operates with a separate following another vehicle too closely, or hydro- computer to modulate the hydraulic pressure to prevent planing.
Page 268
266 STARTING AND OPERATING service is required. However, the conventional brake properly. This self check occurs each time the vehicle is system will continue to operate normally if the “Brake started and accelerated past 7 mph (11 km/h). Warning Light” is not on. ABS is activated during braking under certain road or If the “Anti-Lock Brake Warning Light”...
STARTING AND OPERATING 267 together to enhance vehicle stability and control in vari- WARNING! ous driving conditions and are commonly referred to as ESC. The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to Anti-Lock Brake System (ABS) interference caused by improperly installed or high This system aids the driver in maintaining vehicle control output radio transmitting equipment.
268 STARTING AND OPERATING spinning faster than the other, the system will apply the reduce brake pedal pressure unless braking is no longer brake of the spinning wheel. This will allow more engine desired. Once the brake pedal is released, the BAS is torque to be applied to the wheel that is not spinning.
STARTING AND OPERATING 269 Hill Start Assist (HSA) – If Equipped HSA Activation Criteria The HSA system is designed to assist the driver in The following criteria must be met in order for HSA to launching a vehicle on an incline. HSA will maintain the activate: level of brake pressure the driver inputs for a short •...
Page 272
270 STARTING AND OPERATING The system will only work if the intended direction of the 3. Apply the parking brake. vehicle and vehicle gear match. For example, if the 4. Start the engine. intended direction is forward up a hill and the vehicle is in DRIVE and the activation criteria are met, HSA will 5.
STARTING AND OPERATING 271 EVIC Equipped Vehicles path does not match the intended path, ESC applies the HSA is a Customer Programmable Feature on a EVIC brake of the appropriate wheel to assist in counteracting equipped vehicle. If you wish to turn off the HSA feature, the oversteer or understeer condition refer to “Electronic Vehicle Information Center (EVIC)/ •...
Page 274
272 STARTING AND OPERATING Partial ESC Mode This mode is entered by momentarily pressing the “ESC Off” switch (located in the lower switch bank below the heater/air conditioning controls). When in “Partial Off” mode, the TCS portion of ESC, except for the limited slip feature described in the TCS section, has been disabled and the “ESC Activation/Malfunction Indicator Light”...
STARTING AND OPERATING 273 ESC Activation/Malfunction Indicator Light and WARNING! ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator In the Partial ESC mode, the engine torque reduction Light” in the instrument cluster will come on and stability features are desensitized. Therefore, the when the ignition switch is turned to the ON enhanced vehicle stability offered by ESC is unavail- position.
274 STARTING AND OPERATING Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION celeration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: •...
Page 277
STARTING AND OPERATING 275 • LT (Light Truck) - Metric tire sizing is based on U.S. NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric design standards. P-Metric tires have the letter “P” tires is the same as for P-Metric tires except for the molded into the sidewall preceding the size designa- letters “LT”...
Page 278
276 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 279
STARTING AND OPERATING 277 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
278 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
STARTING AND OPERATING 279 Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
280 STARTING AND OPERATING Tire Loading And Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard Tire Placard Location...
Page 283
STARTING AND OPERATING 281 axles must not be exceeded. For further information on This placard tells you important information about GAWRs, vehicle loading, and trailer towing, refer to the: “Vehicle Loading” in this section. 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of...
Page 284
282 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcu- sengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity.
284 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
STARTING AND OPERATING 285 Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side B-Pillar. hicle to the other can cause the vehicle to drift to Some vehicles may have Supplemental Tire Pressure the right or left.
Page 288
286 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
STARTING AND OPERATING 287 Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
288 STARTING AND OPERATING Spare Tire Matching Original Equipped Tire and CAUTION! Wheel – If Equipped The spare tire of your vehicle is equivalent in look and Because of the reduced ground clearance, do not take function as the original equipment tire and wheel found your vehicle through an automatic car wash with a on the front or rear axle of your vehicle.
STARTING AND OPERATING 289 Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
290 STARTING AND OPERATING your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or icy conditions, do not first opportunity. spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without WARNING! stopping.
STARTING AND OPERATING 291 Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
292 STARTING AND OPERATING Keep dismounted tires in a cool, dry place with as little WARNING! exposure to light as possible. Protect tires from contact • Do not use a tire, wheel size or rating other than with oil, grease, and gasoline. that specified for your vehicle.
STARTING AND OPERATING 293 SNOW TIRES WARNING! (Continued) Some areas of the country require the use of snow tires • Failure to equip your vehicle with tires having during the winter. All season tires satisfy this require- adequate speed capability can result in sudden tire ment can be identified by the M+S designation on the tire failure and loss of vehicle control.
294 STARTING AND OPERATING poorer than that of non-studded tires. Some states pro- The suggested rotation method is the “rearward cross” hibit studded tires; therefore, local laws should be shown in the following diagram. This rotation pattern checked before using these tire types. does not apply to some directional tires that must not be reversed.
STARTING AND OPERATING 295 TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPM System will warn the driver of a low tire The Tire Pressure Monitor System (TPMS) will warn the pressure if the tire pressure falls below the low-pressure driver of a low tire pressure based on the vehicle recom- warning limit for any reason, including low temperature mended cold placard pressure.
Page 298
296 STARTING AND OPERATING For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
STARTING AND OPERATING 297 • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire.
Page 300
298 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings sound a chime. If the ignition key is cycled, this sequence The “Tire Pressure Monitoring Telltale Light” will will repeat, providing the system fault still exists. The illuminate in the instrument cluster, a LOW TIRE “Tire Pressure Monitoring Telltale Light”...
STARTING AND OPERATING 299 NOTE: 5. Once you repair or replace the original road tire, and 1. The compact spare tire (if equipped) does not have a reinstall it on the vehicle in place of the compact spare, tire pressure monitoring sensor. Therefore, the TPMS will the TPMS will update automatically and the “Tire Pres- not monitor the pressure in the compact spare tire.
Page 302
300 STARTING AND OPERATING The TPMS consists of the following components: more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display • Receiver Module a graphic showing the pressure values of each tire with •...
Page 303
STARTING AND OPERATING 301 Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
Page 304
302 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, The EVIC will also display a CHECK TPM SYSTEM providing the system fault still exists. If the system fault message for a minimum of five seconds when a system no longer exists, the “Tire Pressure Monitoring Telltale fault related to an incorrect sensor location fault is Light”...
STARTING AND OPERATING 303 Monitoring Telltale Light” will remain ON, a chime will 5. Once you repair or replace the original road tire, and sound, and the EVIC will still display a flashing pressure reinstall it on the vehicle in place of the compact spare, value in the graphic display.
304 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experi- following licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States ....KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada.
STARTING AND OPERATING 305 The manufacturer supports the use of reformulated gaso- Problems that result from using gasoline containing line. Properly blended reformulated gasoline will pro- Methanol or gasoline containing more than 10% Ethanol vide excellent performance and durability of engine and are not the responsibility of the manufacturer and may fuel system components.
306 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with vehicles. The manufacturer recommends that gasoline E-85 perform the following: without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, •...
STARTING AND OPERATING 307 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
308 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 311
STARTING AND OPERATING 309 the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline-only powered vehicles. Only vehicles with the E-85 fuel filler door label can operate on E-85. E-85 Fuel Cap E-85 Badge...
310 STARTING AND OPERATING Ethanol Fuel (E-85) When you do switch fuel types it is recommended that: E-85 is a mixture of approximately 85% fuel ethanol and • you do not switch when the fuel gauge indicates less 15% unleaded gasoline. than 1/4 full •...
STARTING AND OPERATING 311 • Some additives used in regular gasoline are not fully Starting compatible with E-85 and may form deposits in your The characteristics of E-85 fuel make it unsuitable for use engine. To eliminate driveability issues that may be when ambient temperatures fall below 0°F (-18°C).
312 STARTING AND OPERATING Replacement Parts ADDING FUEL Many components in your Flexible Fuel Vehicle (FFV) are Fuel Filler Cap (Gas Cap) designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- The gas cap is behind the fuel filler door, on the left rear patible parts.
Page 315
STARTING AND OPERATING 313 After removing the gas cap, place the gas cap tether cable NOTE: If the gas cap is lost or damaged, be sure the over a hook on the inside of the fuel door. This keeps the replacement cap is for use with this vehicle.
314 STARTING AND OPERATING on if the gas cap is not secured properly. Make sure WARNING! that the gas cap is tightened each time the vehicle is • Never have any smoking materials lit in or near refueled. the vehicle when the gas cap is removed or the •...
STARTING AND OPERATING 315 VEHICLE LOADING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. Vehicle Certification Label This includes driver, passengers, and cargo. The total Your vehicle has a certification label attached to the rear load must be limited so that you do not exceed the of the driver’s door.
316 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle by axle and side by side. Store heavier items service as long as you do not exceed the GVWR and front down low and be sure you distribute their weight as and rear GAWR.
STARTING AND OPERATING 317 To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all hicles used for trailer towing. cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its loaded and If you have any questions or concerns after reviewing...
Page 320
318 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Tongue Weight (TW) The GAWR is the maximum capacity of the front and rear The tongue weight is the downward force exerted on the axles. Distribute the load over the front and rear axles hitch ball by the trailer.
STARTING AND OPERATING 319 Trailer Hitch Classification Trailer Hitch Classification Definitions The following chart provides the industry standard for Class Max. Trailer Hitch Industry the maximum trailer weight a given trailer hitch class can Standards tow and should be used to assist you in selecting the Class I - Light Duty 2,000 lbs (907 kg) correct trailer hitch for your intended towing condition.
320 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2...
STARTING AND OPERATING 321 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme condi- tions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer.
322 STARTING AND OPERATING NOTE: Remember that everything put into or on the Towing Requirements trailer adds to the load on your vehicle. Also, additional To promote proper break-in of your new vehicle drive- factory-installed options, or authorized dealer-installed train components the following guidelines are recom- options, must be considered as part of the total load on mended: your vehicle.
Page 325
STARTING AND OPERATING 323 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 326
324 STARTING AND OPERATING • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for informa- 4. Trailer tongue weight rating for the trailer hitch tion on tread wear indicators and for proper inspection utilized (This requirement may limit the ability to procedure.
Page 327
STARTING AND OPERATING 325 • An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
326 STARTING AND OPERATING Towing Tips If you REGULARLY TOW a trailer for more than 45 min- Before setting out on a trip, practice turning, stopping, utes of continuous operation, then change the automatic and backing the trailer in an area located away from transmission fluid and filter according to the interval heavy traffic.
STARTING AND OPERATING 327 • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING maximize fuel efficiency. (BEHIND MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle To reduce potential for engine and transmission over- Recreational towing is not allowed.
330 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
WHAT TO DO IN EMERGENCIES 331 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — an impending overheat condition: If Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot.
332 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
WHAT TO DO IN EMERGENCIES 333 Spare Tire Removal Preparations For Jacking Lift up the load floor cover and remove the hold down. 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
334 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the WARNING! (Continued) wheel diagonally opposite the jacking • Always park on a firm, level surface as far from position. For example, if changing the the edge of the roadway as possible before raising right front tire, block the left rear the vehicle.
Page 337
WHAT TO DO IN EMERGENCIES 335 WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 338
336 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack 2. Loosen, but do not remove, the wheel nuts by turning with two attachment points. When the jack is partially them to the left one turn while the wheel is still on the expanded, the tension between the two attachment ground.
Page 339
WHAT TO DO IN EMERGENCIES 337 Front Jacking Location Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed.
Page 340
338 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
WHAT TO DO IN EMERGENCIES 339 torque is 100 ft lbs (135 N·m). If you doubt that you have WARNING! tightened the nuts correctly, have them checked with a torque wrench by your authorized dealer or at a service A loose tire thrown forward in a collision or hard station.
340 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen.
Page 343
WHAT TO DO IN EMERGENCIES 341 3. Remove the protective cover over the remote positive WARNING! (+) battery post. To remove the cover, press the locking • Take care to avoid the radiator cooling fan when- tab and pull upward on the cover. ever the hood is raised.
342 WHAT TO DO IN EMERGENCIES 1. Connect the positive (+) end of the jumper cable to the WARNING! remote positive (+) post of the discharged vehicle. Do not allow vehicles to touch each other as this 2. Connect the opposite end of the positive (+) jumper could establish a ground connection and personal cable to the positive (+) post of the booster battery.
Page 345
WHAT TO DO IN EMERGENCIES 343 5. Start the engine in the vehicle that has the booster 10. Reinstall the protective cover over the remote posi- battery, let the engine idle a few minutes, and then start tive (+) battery post of the discharged vehicle. the engine in the vehicle with the discharged battery.
344 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with Electronic If your vehicle becomes stuck in mud, sand, or snow, it Stability Control (ESC), turn the system to Partial OFF can often be moved by a rocking motion. Turn your before attempting to “rock”...
WHAT TO DO IN EMERGENCIES 345 SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the Fast spinning tires can be dangerous. Forces gener- following procedure to temporarily move the shift lever: ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires.
346 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Trans in NEUTRAL • 25 mph (40 km/h)max speed Rear Wheel Lift Or Dolly Tow •...
Page 349
WHAT TO DO IN EMERGENCIES 347 If flatbed equipment is not available, and the transmis- CAUTION! sion is operable, the vehicle may be flat towed (with all • Do not use sling type equipment when towing. four wheels on the ground) under the following condi- tions: Damage to the fascia will occur.
348 WHAT TO DO IN EMERGENCIES the ground) is not allowed, as transmission damage will CAUTION! occur. If rear towing is the only alternative, the front wheels must be placed on a towing dolly. Proper towing Towing faster than 25 mph (40 km/h) or farther than equipment is necessary to prevent damage to the vehicle.
MAINTAINING YOUR VEHICLE 353 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
354 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the “Malfunction Indicator Light (MIL).”...
MAINTAINING YOUR VEHICLE 355 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
356 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES attempting any procedure yourself. The pages that follow contain the required maintenance services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
MAINTAINING YOUR VEHICLE 357 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 360
358 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all types of operating conditions, the manufacturer recom- Do not overfill the engine. Overfilling the engine mends engine oils that are API Certified and meet the will cause oil aeration, which can lead to loss of oil requirements of Chrysler Material Standard MS-6395.
Page 361
MAINTAINING YOUR VEHICLE 359 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
360 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- Disposing of Used Engine Oil and Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and ber should not be used.
MAINTAINING YOUR VEHICLE 361 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters WARNING! varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR engine air The air induction system (air cleaner, hoses, etc.) can cleaner filters are high quality and are recommended.
Page 364
362 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
MAINTAINING YOUR VEHICLE 363 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
364 MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling The A/C Air Filter is located in the fresh air inlet behind R-134a air conditioning refrigerant is a hydrofluoro- the glove box. Perform the following procedure to re- carbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product.
MAINTAINING YOUR VEHICLE 365 CAUTION! The A/C Air Filter is labeled with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate,...
366 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Operation of the wipers on dry glass for long periods When performing other underhood services, the hood may cause deterioration of the wiper blades. Always use latch, release mechanism and safety catch should be washer fluid when using the wipers to remove salt or dirt cleaned and lubricated.
MAINTAINING YOUR VEHICLE 367 Adding Washer Fluid Exhaust System The fluid reservoir for the windshield washers is located The best protection against carbon monoxide entry into in the engine compartment. Be sure to check the fluid the vehicle body is a properly maintained engine exhaust level in the reservoir at regular intervals.
Page 370
368 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 371
MAINTAINING YOUR VEHICLE 369 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
370 MAINTAINING YOUR VEHICLE Cooling System rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- WARNING! freeze). Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently •...
Page 373
MAINTAINING YOUR VEHICLE 371 Selection Of Coolant CAUTION! (Continued) Use only the manufacturer’s recommended coolant. Re- • Do not use water alone or alcohol-based engine fer to “Fluids, Lubricants, and Genuine Parts” in “Main- coolant (antifreeze) products. Do not use addi- taining Your Vehicle”...
Page 374
372 MAINTAINING YOUR VEHICLE replacement. To prevent reducing this extended mainte- (antifreeze) solution. The use of lower quality water nance period, it is important that you use the same will reduce the amount of corrosion protection in the engine coolant (antifreeze) throughout the life of your engine cooling system.
Page 375
MAINTAINING YOUR VEHICLE 373 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 376
374 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is If an examination of your engine compartment shows no no need to remove the radiator cap unless checking for evidence of radiator or hose leaks, the vehicle may be engine coolant (antifreeze) freeze point or replacing cool- safely driven.
MAINTAINING YOUR VEHICLE 375 • Make sure that the radiator and coolant recovery WARNING! bottle overflow hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 378
376 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up • Use only manufacturer’s recommended brake to the requirements described on the brake fluid reser- voir.
MAINTAINING YOUR VEHICLE 377 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 380
378 MAINTAINING YOUR VEHICLE Parts” in “Maintaining Your Vehicle” for further informa- Special Additives tion. It is important that the transmission fluid be main- Automatic Transmission Fluid (ATF) is an engineered tained at the prescribed level using the recommended product and its performance may be impaired by supple- fluid.
Page 381
MAINTAINING YOUR VEHICLE 379 Fluid Level Check – 2.4L Engine driven at least 15 miles (24 km). Hot fluid cannot be held Use the following procedure to check the automatic comfortably between the fingertips. Cold fluid is at a transmission fluid level properly: temperature below 80°F (27°...
380 MAINTAINING YOUR VEHICLE Fluid Level Check – 3.6L Engine CAUTION! The automatic transmission has no dipstick and is dealer • Using a transmission fluid other than the manu- serviced only. facturer’s recommended fluid may cause deterio- Transmission Fluid and Filter Changes ration in transmission shift quality and/or torque Refer to the “Maintenance Schedule”...
Page 383
MAINTAINING YOUR VEHICLE 381 hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under- • Wash your vehicle regularly. Always wash your ve- body protection. hicle in the shade using MOPAR Car Wash or equiva- The following maintenance recommendations will enable lent, or a mild car wash soap, and rinse the panels you to obtain maximum benefit from the corrosion...
Page 384
382 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 385
MAINTAINING YOUR VEHICLE 383 Wheel and Wheel Trim Care To minimize the possibility of scratching the lenses and All wheels and wheel trim, especially aluminum and reducing light output, avoid wiping with a dry cloth. To chrome-plated wheels, should be cleaned regularly with remove road dirt, wash with a mild soap solution fol- a mild soap and water to prevent corrosion.
Page 386
384 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR Multi-Purpose if absolutely necessary. Do not use harsh cleaners or Cleaner or equivalent to a clean, damp cloth and Armor All . Use MOPAR Total Clean or equivalent to remove the stain. Use a fresh, damp towel to remove clean vinyl upholstery.
Page 387
MAINTAINING YOUR VEHICLE 385 Cleaning Plastic Instrument Cluster Lenses WARNING! The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care Do not use volatile solvents for cleaning purposes. must be taken to avoid scratching the plastic. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
386 MAINTAINING YOUR VEHICLE Cleaning Center Console Cupholders FUSES Totally Integrated Power Module (TIPM) Removal The TIPM is located in the engine compartment near the Grab the rubber portion of the cupholder and lift air cleaner assembly. This center contains cartridge fuses upward.
Page 389
MAINTAINING YOUR VEHICLE 387 Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse 40 Amp Power Top Mod- Ignition Off — 30 Amp Green ule – If Equipped — Draw (IOD) Green Sense 2 20 Amp Yel- —...
Page 390
388 MAINTAINING YOUR VEHICLE Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse 20 Amp Yel- 15 Amp Lt. — Ignition — Radio Blue — 10 Amp Red Instrument Panel Siren – If — 10 Amp Red Equipped 40 Amp Radiator Fan...
Page 391
MAINTAINING YOUR VEHICLE 389 Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse 15 Amp Lt. Auto Shutdown Ignition Run – — 20 Amp Yel- Blue (ASD) Relay 2 — Heated Seats – If Equipped Ignition Run – Occupant Classi- Headlamp fication Module...
Page 392
390 MAINTAINING YOUR VEHICLE Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse Anti-Lock Brakes Passenger Door (ABS) Module – 30 Amp Module (PDM)/ — If Equipped/ Pink Driver Door 30 Amp — Electronic Stabil- Module (DDM) Pink ity Control (ESC) 25 Amp...
MAINTAINING YOUR VEHICLE 391 VEHICLE STORAGE CAUTION! If you will not be using your vehicle for more than • When installing the Totally Integrated Power 21 days, you may want to take steps to preserve your battery. Module cover, it is important to ensure the cover is properly positioned and fully latched.
392 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS LIGHT BULBS – Exterior Bulb No. All the inside bulbs are brass or glass wedge base. Low Beam Headlamp ..... H11 Aluminum base bulbs are not approved and should not High Beam Headlamp .
Page 395
MAINTAINING YOUR VEHICLE 393 NOTE: It may be necessary to remove the air cleaner 3. Rotate bulb and connector ⁄ turn and pull outward filter housing and position the totally integrated power from assembly. module aside prior to replacing the low beam headlamp on the driver’s side of the vehicle.
394 MAINTAINING YOUR VEHICLE 4. Pull the bulb out of the socket and replace the bulb. Fog Lamps 1. Access to the lamps through the lower fascia cutout is limited. 2. Turn the steering wheel to allow access and remove the inner fender shield.
MAINTAINING YOUR VEHICLE 395 Backup Lamps 3. Grasp the tail lamp and pull firmly outward pushing gently on the studs from inside to disengage the lamp 1. Open the trunk and gently pull back the trunk liner housing. behind the tail lamp. 2.
396 MAINTAINING YOUR VEHICLE License Plate Lamp 2. Gently pry the lamp assembly loose. 1. Remove two retaining screws holding the light lens in 3. Pull bulb from socket, replace and reattach the lamp place. assembly with the two retaining screws. FLUID CAPACITIES U.S.
MAINTAINING YOUR VEHICLE 397 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- Engine Coolant brid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Engine Oil –...
398 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed Automatic Transmission ATF+4 product. MOPAR DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is Brake Master Cylinder not available, then DOT 4 is acceptable.
Page 402
400 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Non-EVIC equipped vehicles “Change Oil” will flash The Scheduled Maintenance services listed in this in the instrument cluster odometer and a single chime manual must be done at the times or mileages specified will sound, indicating that an oil change is necessary. to protect your vehicle warranty and ensure the best Based on engine operation conditions the oil change vehicle performance and reliability.
Page 403
MAINTENANCE SCHEDULES 401 • Under no circumstances should oil change intervals At Each Stop for Fuel exceed 8,000 miles (13 000 km) or six months, which- • Check the engine oil level about five minutes after a ever comes first. fully warmed engine is shut off.
Page 404
402 MAINTENANCE SCHEDULES Once a Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required.
Page 405
MAINTENANCE SCHEDULES 403 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
404 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 407
MAINTENANCE SCHEDULES 405 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 408
406 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 409
MAINTENANCE SCHEDULES 407 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 410
408 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 96,000 Miles (156,000 km) or 72 Months Maintenance Service 66 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 411
MAINTENANCE SCHEDULES 409 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 412
410 MAINTENANCE SCHEDULES 120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 413
MAINTENANCE SCHEDULES 411 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 414
412 MAINTENANCE SCHEDULES 152,000 Miles (247,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 152,000 miles (247 000 km). Odometer Reading Date Repair Order #...
Page 415
MAINTENANCE SCHEDULES 413 † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Suggestions For Obtaining Service For Your Vehicle......417 Speech Impaired (TDD/TTY) .
Page 418
416 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 423 Department Of Transportation Uniform Tire Quality Grades ......423 ▫...
IF YOU NEED CONSUMER ASSISTANCE 417 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
418 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (800) 423–6343 •...
IF YOU NEED CONSUMER ASSISTANCE 419 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
420 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
IF YOU NEED CONSUMER ASSISTANCE 421 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
Page 424
422 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles.
IF YOU NEED CONSUMER ASSISTANCE 423 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
424 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 445
INDEX 443 Trip Odometer Reset Button ....157 Vehicle Modifications/Alterations ....7 Trunk Release Remote Control .
Page 446
444 INDEX Window Fogging ......238 Windshield Wiper Blades ....366 Windows .
Page 447
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 448
Chrysler Group LLC Second Edition 11D41-126-AB Printed in U.S.A.
Need help?
Do you have a question about the Avenger 2011 and is the answer not in the manual?
Questions and answers