Remove the following:
3.
(1) Three Phillips PM2.5×4.0 screws in the optical drive bay
(2) Six Phillips PM2.5×5.0 screws in the battery bay
(3) Two Hex HM5.0×9.0 standoffs in the memory/WLAN module compartment
Turn the computer right-side up, with the front toward you.
4.
Disconnect the TouchPad cable (1) from the system board.
5.
Remove the two Phillips PM2.5×8.0 screws (2) and the two Phillips PM2.5×5.0 screws (3) that
6.
secure the top cover to the computer.
64
Chapter 4 Removal and replacement procedures