Electrical Connection - AEG LAVAMAT 16850A3 User Manual

44

Electrical connection

Before connecting up the machine to new pipework or to pipework that has not been used
for some time, run off a reasonable amount of water to flush out any debris that may have
collected in the pipes.
In the interest of the environment
The appliance should be connected to the FOUL
drainage system, the water will then be taken to a
sewage works for treatment before being dis-
charged safely into a river.
It is essential that these appliances are not con-
nected to the surface water drainage system as
this water is discharged directly into a river or
stream and may cause pollution.
If you require any further advice please contact
your local water authority.
ELECTRICAL CONNECTION
Information on the electrical connection is given on the rating plate on the inner edge of
the appliance door.
Check that your domestic electrical installation can take the maximum load required, also
taking into account any other appliances in use.
WARNING!
Connect the machine to an earthed socket.
WARNING!
The appliance is supplied with a 13amp plug fitted. In the event of having to change the
fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.
WARNING!
The manufacturer does not accept any responsibility for damage or injury through fail-
ure to comply with the above safety precaution.
WARNING!
Should the appliance power supply cable need to be replaced, this MUST be carried out
by a Service Centre.