Mazda 2014 Zoom-Zoom User Manual page 310

Interior Features
Audio System
qOperating the Radio
Audio button
Radio ON
(Connected Satellite Radio)
Press the audio button (
the on-screen tab.
(Unconnected Satellite Radio)
Press the audio button (
the or
Band selection
(Connected Satellite Radio)
Touch the
the band as follows:
FM1→FM2→AM
NOTE
is displayed when FM1 is selected,
l
is displayed when FM2 is
selected, and
is selected.
If the FM broadcast signal becomes weak,
l
reception automatically changes from
STEREO to MONO for reduced noise, and
the STEREO indicator will no longer
display.
(Unconnected Satellite Radio)
Touch the on-screen tab to select
AM. Touch the
select FM1 and FM2.
5-40
) and touch
) and touch
on-screen tab.
on-screen tab to switch
is displayed when AM
on-screen tab to
Manual tuning dial
NOTE
When FM1 is selected,
l
When FM2 is selected,
If the FM broadcast signal becomes weak,
l
reception automatically changes from
STEREO to MONO for reduced noise, and
the STEREO indicator will no longer
display.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
NOTE
When an
received, a receivable multicast channel is also
received.
Seek tuning buttons
is displayed.
is displayed.
broadcast is being